Aluminum cellular structures have been fabricated by combining a two-dimensional [0◦/90◦]2 arrangement of square Al 6061-T6 alloy tubes with orthogonal tubes inserted in the out-of-plane direction. By varying the tube wall thickness, the resulting three-dimensional cellular structures had relative densities between 11 and 43%. The dynamic compressive response of the three-dimensional cellular s...

Ageing of 75% cold rolled Al-6Mg alloy with ternary 0.4 wt% scandium and quaternary zirconium and titanium has been carried out. Alloy samples are naturally, isochronally and isothermally aged for different time and temperatures. Hardness values of the differently processed alloys have been measured to understand the ageing behavior of Al-6Mg alloy with scandium and quaternary zirconium and tit...

Hydrogen embrittlement affected by three types of plating (low-P and high-P electroless Ni-P electrolytic Zn-platin) was investigated means slow-strain-rate three-point bending test on aluminum alloys (2017-T3, 6061-T6 7075-T651). generated the zinc absorbed alloy substrates, trap sites in substrates for hydrogen differed between plating. able to be evaluated tests plated alloys. Zinc did not c...

In AA2618 aluminum alloy, the iron- and nickel-rich intermetallics formed during solidification are of great effect on the mechanical properties of the alloy at both room temperature and elevated temperatures. However, the solidification behavior of the alloy and the formation mechanism of the intermetallics during solidification of the alloy are not clear. This research fills the gap and contr...

A novel non-keyhole friction stir welding technique was proposed to weld the butt joint of 6061-T6 aluminum alloy with thickness 6 mm. sound obtained by this technique, simultaneously eliminating flash, shoulder mark and keyhole defects. The sleeve directly affected zone (SDAZ) indirectly (SIAZ) were divided into according plunging position hollow sleeve. lack root penetration defect avoided wh...