An ultra-low-voltage low-power switched-capacitor (SC) delta-sigma (∆Σ) modulator running at a supply voltage as low as 300 mV is presented for biomedical implant devices, e.g., cardiac pacemakers. To reduce the supply voltage, an inverter-based amplifier is used in the integrators, whose DC gain and gain-bandwidth (GBW) are boosted by a simple current-mirror output stage. The full input-feedfo...

This study describes and presents the analysis for the Source-Coupled Logic (SCL) inverter as will as the effect of submicron layout parasitics. The SCL inverter circuit model and its operation is defined. The analysis for the SCL is carried from the point of view of input/output voltage characteristics and the effect of noise margin. The inverter gate delay model is described and the effect of...

The LM5032 dual current mode PWM controller contains all the features needed to control an interleaved boost converter. The two outputs operate 180 degrees out of phase and have separate current limit inputs for each channel. In addition to a high input voltage range, the controller contains all the auxiliary features needed to control a complete converter. Introduction A basic boost converter ...

This project is a highly efficient and novel control strategy for improving the transients in the output voltage of a dc–dc positive buck–boost converter which is required for low-power portable electronic applications. The proposed control technique can regulate the output voltage for variable input voltage (higher, lower, or equal to the output voltage). There are several existing solutions t...

We show GHz modulation in a 2.5 microm radius silicon micro-ring, with only 150 mV peak-peak drive voltage and an electro-optic modal volume of only 2 microm(3). The swing voltage and the micro-ring modulator are the smallest demonstrations so-far in silicon. The presented approach lays the ground work for a new class of high speed low voltage modulators enabling, seamless integration of nanoph...

applications in analog and digital circuitry. This study investigates the ability of the JFET bottom-gate to adjust and control several parameters in the FlexfetTM as well as shield against performance degradation due to substrate biasing. The device parameters under investigation include drive current, leakage current, and threshold voltage. The newly assigned F-factor describes the ability of...

<p>In this research, we present a low phase noise (PN) and wide tuning range 175 GHz inductors capacitors (LC) voltage-controlled oscillator (VCO) based on differential Colpitts that was designed using 0.13 μm bipolar complementary metal oxide semiconductor (BiCMOS) simulated. The square of the tank Q-factor oscillation amplitude were both maximized to reduce PN. With an extensive examina...

For the use of green energy and ubiquitous computing, this study investigates miniature electric generators that are constructed with piezoelectric benders. Electric power is generated by vibratory deformation of piezoelectric benders. Three different designs of piezoelectric generators are created and compared in this study by using mechanics analysis. The result shows that the cantilever desi...

An Energy Efficient Feedthrough Logic (EE-FTL) is proposed in this paper to reduce the power consumption for low power applications. The EE-FTL is well suited to arithmetic circuits where the critical path is made of a large cascade of inverting gates. It has a unique characteristic where the output is pre-evaluated before the inputs from the preceding stage are ready. The proposed logic style ...

in this paper, a new cascaded multilevel inverter by capability of increasing the number of output voltage levels with reduced number of power switches is proposed. the proposed topology consists of series connection of a number of proposed basic multilevel units. in order to generate all voltage levels at the output, five different algorithms are proposed to determine the magnitude of dc volta...