A new method of acquiring simultaneously the signal and reference channels used for interferometric planar Doppler velocimetry is proposed and demonstrated. The technique uses frequency division multiplexing (FDM) to facilitate the capture of the requisite images on a single camera, and is suitable for time-averaged flow measurements. Furthermore, the approach has the potential to be expanded t...

Compared to the common selective laser sintering (SLS) manufacturing method, fused deposition modeling (FDM) seems to be an economical and efficient three-dimensional (3D) printing method for high temperature polymer materials in medical applications. In this work, a customized FDM system was developed for polyether-ether-ketone (PEEK) materials printing. The effects of printing speed, layer th...

In this paper we present the latest developments in the design, fabrication and application of single and arrays of biomimetic hair flow-sensors towards high-resolution air-flow imaging. Redesigning the electrode system of the hair sensor (using SOI wafer technology) has led to improve the detection limit down to 1 mm/s air-flow amplitude using 3 kHz measurement bandwidth. SOI technology facili...

The screening current induced in a bulk superconductor presents a critical problem for gradient coil design because it gives rise to undesirable effects on the gradient field: namely, a decrease in the efficiency and a distortion of the field. In this paper, a new coil design method for the bulk magnet is proposed using the finite-difference method (FDM) and the target-field method. The calcula...

We investigate the influence of boundary slip velocity in Newtonian fluids at finite Reynolds numbers. Numerical simulations with Lattice Boltzmann method (LBM) and Finite Differences method (FDM) are performed to quantify the effect of heterogeneous boundary conditions on the integral and local properties of the flow. Non linear effects are induced by the non homogeneity of the boundary condit...

A 3D-printed microfluidic device was designed and manufactured using a low cost ($2000) consumer grade fusion deposition modelling (FDM) 3D printer. FDM printers are not typically used, or are capable, of producing the fine detailed structures required for microfluidic fabrication. However, in this work, the optical transparency of the device was improved through manufacture optimisation to suc...

Polyetherimide (PEI) blends modified by either polycarbonate (PC) or polyethylene terephthalate glycol-modified (PETG) were prepared. The latter modifier (PETG) was an industrial grade widely used for fused deposition modelling (FDM) printing. PEI blends were compared to Ultem 9085, which is the standard PEI grade for FDM printing in advanced applications. All the blends were thoroughly charact...

A 3D parallel overlapping scheme for viscous incompressible flow problems is presented that combines the finite element method, which is best suited for analysing flow in any arbitrarily shaped flow geometry, with the finite difference method, which is advantageous in terms of both computing time and computer storage. A modified ABMAC method is used as the solution algorithm, to which a sophist...

We are developing Frequency Domain Multiplexing (FDM) for the read-out of TES imaging microcalorimeter arrays for future X-ray missions like IXO. In the FDM configuration the TES is AC voltage biased at a well defined frequencies (between 0.3 to 10MHz) and acts as an AM modulating element. In this paper we will present a full comparison of the performance of a TES microcalorimeter under DC bias...

Deep-seated slope failures are common features in the mountains of the Raca Unit, Magura Nappe of the Flysch Belt of Western Carpathians. Since they represent very complicated system, understanding of their evolution and triggers still remains unclear. We tried to provide a back-analysis of their development by using a finite difference code (FDM) of continua (Flac 4.0). We confirmed that such ...