effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. lungmuir, frumkin and flory-huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...

An investigation was performed to determine whether corrosion resistant boron-free E-glass fibers could adequately prevent acid induced brittle fracture failures of high voltage composite insulator rods. Nine different rod compositions were tested at 45% of mechanical failure load in contact with 1 N nitric acid. Rods made out of commonly used E-glass fibers failed mechanically in less than 2 h...

4 (cp-Ti-4), subjected to disinfection with 0.2% and 2% peracetic acid during different immersion periods using anodic potentiodynamic polarization test in acid and neutral artificial saliva. Cylindrical samples of cp-Ti-4 (5 mm x 5 mm) were used to fabricate 24 working electrodes, which were mechanically polished and divided into eight groups (n=3) for disinfection in 2% and 0.2% peracetic aci...

The corrosion behavior of mild steel in 0.1 M aqueous sulfuric acid medium has been studied using weight loss, potentiodynamic polarization measurements, quantum chemical calculations, and molecular dynamic simulations in the presence and absence of 4-methyl-4H-1,2,4-triazole-3-thiol and 2-mercaptonicotinic acid. Potentiodynamic measurements indicate that these compounds mostly act as mixed inh...

Abstract The objective of this study is to experimentally evaluate a new acid combination HEDP: CH 3 COOH as retarded minimize some limitations high-temperature sandstone acidizing, such fast acid-rock reaction and secondary precipitation pipeline corrosion. In work, the acid–base titration, core-powder solubility test, scale deposition corrosion rate measurement corefloods were carried out per...

The protection of metallic surface is commonly done with zinc phosphate in acid aqueous phosphate solutions containing zinc ions and phosphoric acid, as well in addition of other metallic ions (nickel, chromium, calcium, niobium etc.), in presence of accelerators as nitrate ions, hydroxylamine sulfate, benzotriazole and others. The present article is a study on the surface structure of zinc pho...