Experimental laboratory work has been conducted to study electric signals of marble beams that have been subjected to three point bend tests. The specimens have suffered 12 abrupt loading steps up to failure and the corresponding BSC were recorded by means of copper electrodes placed in the lower surface of the sample. Alongside with the application of abrupt loading to the samples, BSC peaks w...

PURPOSE The objective of this study was to assess the stress distribution generated by a simulated loading (100 N) in the area of the cantilever in three different five-implant mandibular protocol prosthesis models. MATERIALS AND METHODS The finite element analysis was carried out in three-dimensional models simulating: (1) a temporary all acrylic resin mandibular protocol prosthesis; (2) a m...

Security is an obvious risk to active networking, as increased flexibility creates numerous opportunities for mischief. The point at which this flexibility is exposed, e.g., through the loading of code into network elements, must therefore be carefully crafted to ensure security. The Secure Active Network Environment (SANE) architecture provides a secure bootstrap process resulting in a module ...

The mechanical behavior of gel-spun, ultra-drawn, UHMW-PE fibers was investigated as a function of temperature, stress, and time under static and dynamic loading conditions. From a phenomenological point of view, two separate contributions to the deformation behavior could be distinguished, i.e., a reversible (viscoelastic) contribution and an irreversible plastic flow component. It was investi...

A foundational element in determining Total Maximum Daily Loads (TMDLs) is the determination of the relative impacts of point and nonpoint source impacts on the dissolved oxygen concentration (DO) of an impaired stream. It is not uncommon that the ultimate oxygen demand during a rain event can be greater than the effects of the fully permitted point source loading to the stream. Traditionally, ...

Hidden failure in a protection system has been recognized as one of the main reasons which may cause to a power system instability leading to a system cascading collapse. This paper presents a computationally systematic approach used to obtain the estimated average probability of a system cascading collapse by considering the effect of probability hidden failure in a protection system. The esti...

An investigation into the effect of countersunk depth, plate thickness, countersunk angle and plate width on the stress concentration around countersunk hole is carried out with the help of finite element analysis. The variation of stress concentration with respect to these parameters is studied for three types of loading viz. uniformly distributed load, uniformly varying load and functionally ...

A simple geometric argument relating to the liquid water content of clouds is given. The phase relaxation time and the nature of the quasi-steady approximation for the diffusional growth of cloud drops are elucidated directly in terms of water vapor concentration. Spatial gradients of vapor concentration, inherent in the notion of quasi-steady growth, are discussed and we argue for an occasiona...

The use of bicortical screws to fix metacarpal fractures has been suggested to provide no added biomechanical advantage over unicortical screw fixation. However, this was only demonstrated in static loading regimes, which may not be representative of biological conditions. The present study was done to determine whether similar outcomes are obtained when cyclic loading is applied. Transverse mi...

in this paper, simulation and analysis of thin steel cylindrical shells with elliptical cutouts under oblique loading were studied using finite element method. first, the numerical results were validated by the results of experimental test performed by an instron 8802 servo hydraulic machine. also, the effect of cutout angle (θ), cutout size, cutout position (l0/l) and cutout aspect ratios (b/a...