In this research, tribological characteristics of Ni-P electroless coating and double-layered Ni-P/Ni-B electroless coating were studied. For this purpose, Ni-P electroless coating with 25 μm thickness was initially applied to the surface of steel Ck45 samples; then, a double-layered Ni-P/Ni-B electroless coating, including inner layer of Ni-P with 15 μm thickness and outer layer of Ni-B with 1...

The friction and wear performance of ultra high molecular weight polyethylene(UHMWPE) and pure poly-ether-etherketone(PEEK) polymers were comparatively evaluated under dry sliding and cacao drops lubrication. The sliding experiments were carried out on a pin-on-disc tribometer. The contact configuration used was a polymer pin on a rotating stainless steel disc. Wear tests were carried out at ro...

Nickel chromium (NiCr) powders with different titanium diboride (TiB2) additions (20, 40 and 60 wt %) were prepared with a mechanical alloying method and then sprayed using an air plasma spraying technology. The microstructure and phase composite of the powders and the cross-sections of deposited coatings were analyzed with a scanning electronic microscope and X-ray diffraction. The tribologica...

This paper considers the problem of wear estimation in a standard industrial robot joint. Motivated by the observation that the wear processes in a robot actuator cause an increase of the friction levels in the joint, static friction observations are used to infer the wear levels. An existing static friction model is extended to include the e ects of wear, which are analyzed and modeled. The re...

The surface tooth wear which occurs at the gear contact region due to inadequate contact strength of the tooth is one of the predominant modes of gear failures. Currently, higher contact ratio spur gears are increasingly used in power transmission applications such as aircraft, wind turbine, automobiles and compact tracked vehicles due to their high load carrying capacity.  In this work, the di...

as the turbine industries need to manufacture turbine blades made of martensitic stainless steel aisi 420 with high toughness and wear resistance, local laser hardening has become more and more important. in this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...

The UHMWPE has a plastic behaviour but it is specified only the surface wear, unless the evaluation of the great importance of this behaviour of plasticity for the calculation of the depth of penetration. This work tries to demonstrate the fact that there are components of the wear by plastic deformation. Also, by this type of wear an explanation of smooth surface of the UHMWPE in the contact z...

OBJECTIVES The purpose was to assess thermal changes and drill wear in bovine bone tissue with the use of twisted stainless steel and zirconia-based drills, during implant site preparation. METHODS A total of 100 implant site preparations were performed on bovine ribs using a surgical unit linked to a testing device, in order to standardize/simulate implant drilling procedures. Bone temperatu...

Tool wear increases cutting force, vibration, temperature, etc in end milling and reduces surface finish of the machined work piece. Mathematical model has been developed to predict the tool wear in terms of machining parameters such as helix angle of cutting tool, spindle speed, feed rate, axial and radial depth of cut. Central composite rotatable second order response surface methodology was ...

This paper investigates the tribological behavior of 100Cr6 steel pin running against sintered steel bearing material used in hermetic compressors. Tests were conducted under dry and starved lubrication sliding conditions in air at room temperature. Although porous structure acts as crack initiation sites thus limiting the wear resistance of sintered iron in dry sliding conditions under high co...