Ni-20 wt pct Cr wires, as individual wires or within 3D woven structures, are alloyed with Mo, Al, and Ti by gas-phase surface deposition and volume interdiffusion. Mo deposition creates Mo-rich coating and Kirkendall pores. Al+Ti co-deposition creates uniform triple-layered coating. The resulting homogenized and aged Ni-(17.4-19.6)Cr-(1.6-1.8)Al-(2.5-3.6)Ti-(1.54.5)Mo(wt pct) wires exhibit c+ ...

Micron-size Ni-base alloy (NBA) powders were mixed with both 1.5 wt.% (hereinafter %) micron-size CeO2 (m-CeO2) and also 1.5% and 3.0% nano-size CeO2 (n- CeO2) powders. These mixtures were coated on low-carbon steel (Q235) by 2.0 kW CO2 laser cladding. The effects on the microstructures, phases and electrochemical corrosion of the coatings upon the addition of m- and n- CeO2 powders to NBA (m- ...

Novel nitrogen-doped carbon hybrid materials consisting of multiwalled nanotubes and porous graphitic layers have been produced by chemical vapor deposition over magnesium-oxide-supported metal catalysts. CN x nanotubes were grown on Co/Mo, Ni/Mo, or Fe/Mo alloy nanoparticles, and MgO grains served as a template for the porous carbon. The simultaneous formation of morphologically different carb...

The partitioning behavior of W in a multicomponent Ni-based superalloy and in a ternary Ni–Al–W alloy is investigated using atom-probe tomography APT and first-principles calculations. APT observations indicate that whereas W partitions preferentially to the L12 -precipitates in the ternary alloy, its partitioning behavior is reversed in favor of the fcc -matrix in the multicomponent alloy. Fir...

The phase structures and hydrogen storage properties of a Ti Zr V Ni alloy are studied. It is found that this alloy consists of a 0.7 0.2 0.1 matrix and a secondary phase. The matrix is a B2-type compound with bcc structure and the secondary phase is a C14-type Laves phase with hexagonal structure. This alloy electrode has a larger charge–discharge capacity than stoichiometric TiNi electrodes b...

One of the main reactions that can be used to reduce greenhouse gases emissions is Reverse Water Gas Shift (RWGS) reaction. Through this reaction CO2 is converted to CO to produce beneficial chemicals such as methanol. In this paper Mo/Al2O3 catalyst was prepared and then promoted with Ni ions through impregnation method to produce Ni-Mo/Al2O3 catalyst. The structures of the catalysts were stud...

Dental alloys for direct metal laser sintering (DMLS) are available on the market today, but there is little scientific evidence reported on their characteristics. One of them is the release of ions, as an indicator of the corrosion characteristics of a dental alloy. Within this research, the difference in the elution of metals from DMLS and cast (CM) samples of Co-Cr-Mo dental alloy in saliva-...

Tailoring the partitioning behavior of solid solution strengtheners is a crucial design strategy for advanced Ni-based superalloys. The goal this study was to maximize enrichment Mo, Re, Ru and W in γ-matrix phase. To determine composition dependency behavior, set polycrystalline superalloys with varying contents these solution-strengthening elements W-containing single-crystalline alloy series...

The reduction of unprotected indoles and quinolines is described using water as a hydrogen source. The method is based on the application of a RANEY® type Ni-Al alloy in an aqueous medium. During the reaction the Al content of the alloy, used as reductants, reacts with water in situ providing hydrogen and a RANEY® Ni catalyst, thus the alloy serves as a hydrogen generator as well as a hydrogena...