It is well documented that plastics surface modification techniques can greatly improve the acceptance of a wide variety of coatings, adhesives and inks for improved decoration, painting and adhesive assembly. By increasing the hydrophilic characteristics and surface-free energy of plastics, bond strengths can be improved dramatically. It is theorized that interlayer adhesion between decorating...

This article describes the development and the examination of surface coatings that suppress the adhesion between glass surfaces and polymer microspheres. Superparamagnetic doping allowed for exerting magnetic forces on the microbeads. The carboxyl functionalization of the polymer provided the means for coating the beads with polyethylene glycol (PEG) with different molecular weight. Under grav...

The hydrothermal-electrochemical method is best suited for producing homogeneous apatite coatings on electro-conductive materials with complicated shape, such as the mesh. This study was undertaken to examine the effect of the apatite coating prepared by this coating method on cell adhesion, proliferation, and differentiation of MC3T3-E1 cells in culture. The cells attached and spread well on t...

The severe adhesion between silicon and glass has limited its application as mold material in precision glass molding. In this paper, a novel coating approach to create non-stick silicon mold for glass molding was introduced by using carbide-bonded graphene, a two dimensional material with a patterned atomic structure. A graphene coated silicon mold was fabricated using a coating process develo...

Ice accumulation on solid surfaces adversely affects many applications. Among diverse surface modification methods to reduce ice adhesion strength, superhydrophobic (SHP) have been considered due their non-wetting characteristics, which minimize the solid-liquid interface, reducing actual solid-ice contact area. In this work, shear strength required for removal was studied a series of thermopla...

A novel approach is reported for cell patterning based on addressable microheaters and a poly(N-isopropyl acrylamide) (pNIPAM) themoresponsive coating. This thermoresponsive coating is created by a radio frequency NIPAM plasma and is denoted as plasma polymerized NIPAM (ppNIPAM). Films of ppNIPAM with a good retention of monomer side-chain functionality are produced using low-power continuous p...

The objective of this study was to mimic the microstructure of MCrAlY coatings sprayed using HVOF (High Velocity Oxy-Fuel) processes by using an Air Plasma Spray (APS) process in order to improve oxidation and spallation life of MCrAlY APS coatings. Figure 1 shows the typical microstructures obtained when spraying bond coats using the (a) HVOF process, and (b) the APS process. The microstructur...

It is necessary to control the profile of abrasive-blasted metal surfaces to a degree. But it is not necessary to maintain an exact profile on all surfaces as long as the profile falls within an acceptable range. The acceptable range is usually determined by the type of coating and total dry film thickness (dft) being applied. Generally, the profile should be 20 percent to 25 percent of the tot...

In this work, TiN/TiCN & PN/TiCN multilayer films were deposited by plasma- assisted chemical vapour deposition (PACVD). Plasma nitriding (PN) and TiN intermediate layer prior to coating leads to appropriate hardness gradient and it can greatly improve the mechanical properties of the coating. The composition, crystalline structure and phase of the films were investigated by X-ray d...

Conducting polymers (CPs), including polypyrrole, have attracted attention for their potential in the protection of metals against corrosion; however, CP coatings have the limitation of poor adhesion to metal substrates. In this study, a composite coating, comprising a self-organized porous anodic oxide layer and a polypyrrole layer, has been developed on iron. Because of electropolymerization ...