Abstract This clinical report presents a case of abutment fracture, due to occlusal overload, occurred with an implant-supported restoration on right mandibular first molar of a female patient. After 6 months of prosthetic reconstruction implants, the patient returned to the clinic due to the loss of implant crown. The fractured fragment of the abutment with the screw protec...

STATEMENT OF PROBLEM Implant drivers are getting popular in clinical dentistry. Unlike to implant systems with external hex connection, implant drivers directly engage the implant/abutment interface. The deformation of the implant/abutment interface can be introduced while placing an implant with its implant driver in clinical situations. PURPOSE This study evaluated the change of rotational ...

A two-dimensional finite element model of a mandibular quadrant was used to examine differences in magnitude of the principal stresses from the placement of three- and four-unit bridges. The area of interest spanned the first premolar to the second molar. Loading conditions were (i) vertical and distributed and (ii) 30 degrees to the vertical and concentrated. The principal stresses were calcul...

A coded implant healing abutment makes an impression at the implant level no longer necessary. An impression is made of the healing abutment, which is placed onto the implant directly after implant placement. The codes embedded in the occlusal surface of the healing abutment provide essential information for the computer software to place the implant analog in the definitive cast and to design ...

A five unit fixed dental prosthesis with a pier abutment poses a unique challenge of a fulcrum and torquing forces at the intermediate abutment. The use of a rigid connector can lead to localization of forces on the pier abutment. Therefore, the use of a non-rigid connector as a stress breaker has been advocated to alleviate the situation. The following case report describes the factors associa...

Structure of diaphragm was defined as a transverse strengthener beam which located between beams or girders to keep section geometry. It plays significant role provide the stability bridge and distribute vertical axial loads. The main objective this study investigate influence construction concrete diaphragms T-beams at different distances on dynamic static behavior T-beam structure. methodolog...

A unique shape memory alloy (SMA) restrainer cable is developed and tested to evaluate its effectiveness in limiting the hinge opening in bridges. The SMA cables, connected at the deck–abutment interface, are tested on a four-span, one-quarter scale, concrete slab bridge. The bridge is subjected to a suite of ground motion to assess the performance of the SMAs under different magnitudes of load...

This paper summarizes results of a major study on jointless bridges sponsored by the U.S. Federal Highway Administration. This study included extensive laboratory and field experiments as well as detailed analytical studies. A set of design recommendations were provided. Jointless bridges have reduced maintenance, improved riding quality, lower impact loads, reduced snowplow damage, and structu...