Carbon nanotubes (CNTs) were incorporated into alumina/polyethersulfone hollow fibre membranes to enhance the mechanical property and the efficiency of water treatment. Results show that the incorporation of CNTs can greatly limit the formation of large surface pores, decrease the void size in support layers and improve the porosity and pore connectivity of alumina/polyethersulfone membranes. A...

This is a safety assessment of alumina and aluminum hydroxide as used in cosmetics. Alumina functions as an abrasive, absorbent, anticaking agent, bulking agent, and opacifying agent. Aluminum hydroxide functions as a buffering agent, corrosion inhibitor, and pH adjuster. The Food and Drug Administration (FDA) evaluated the safe use of alumina in several medical devices and aluminum hydroxide i...

A series of polycarboxylate ether-based copolymers that include acrylic acid, 2acrylamido-2-methylpropane sulfonic acid, and polyethylene glycol-1000 was synthesized and the performance of these copolymers as rheology modifiers in aqueous alumina suspensions was characterized. We discussed the effect of monomer feed ratio and molecular weight on dispersing ability of these copolymers and on ext...

Electrical conductivity in the Earth's mantle is sensitive to temperature and chemical environment. Recent laboratory measurements of electrical conductivity are combined with candidate mantle geotherms to produce synthetic electrical conductivity profiles. These profiles are used to forward model the Earth's geomagnetic response function C, results of which are compared with the observed globa...

In this study, three different compositions of ZnO and TiO₂ powders were cold compressed and then heated at 1250 °C for five hours. The samples were ground to powder form. The powders were mixed with 5 wt % of polyvinyl butyral (PVB) as binder and 1.5 wt % carbon black and ethylene-glyco-lmono-butyl-ether as a solvent to form screen-printed pastes. The prepared pastes were screen printed on the...

Hand-held signals (HHS) are used in signaling troop movements and aircraft. Meant to attract attention and to identify the positions of military personnel, HHS technologies find use in both training exercises and combat situations, and improvements are being sought to advance existing HHS technology. One of the most popular HHS items used by the US military for illuminating purposes is the M127...

A process involving the filtration of graphene oxide (GO) dispersion through an alumina membrane, followed by oxygen annealing to synthesize alumina nanoparticles exclusively at the edges of holes or vacancies in the reduced graphene oxide (rGO) plane, is used to prepare paper-like composites with a 21% enhanced electrical conductivity. Moreover, the rGO/alumina nanocomposites have a smaller ba...

To study the photodegradation of organic pollutants at the interface of minerals and water in natural environment, three series of alumina-coupled iron oxides (Al(2)O(3)-Fe(2)O(3)-300, Al(2)O(3)-Fe(2)O(3)-420, and Al(2)O(3)-Fe(2)O(3)-550) with different alumina fraction were prepared and characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and Barret-Joyner-Halender (BJH), and...

The microstructure evolution and interface characteristics of a directionally solidified Ti-43Al-3Si (at.%) alloy in an alumina (Al2O3) crucible with new Y2O3 skull-aided technology were investigated. The Y2O3-skull that is in contact with the TiAl-melt is relatively stable, which results in a more controlled reaction between the skull and the melt than in the case of an Al2O3 crucible is used....

Alumina nanostructures, nanowires, and semicolumn nanotubes with high aspect ratios were synthesized by the chemical etching of porous alumina membranes (PAMs) in phosphoric acid solution. The morphology and structure of alumina nanostructures were analyzed by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and X-ray diffraction (XRD), respectively. The results showed that...