Recently, with the requirement of lighter weight and more safety for a design of automobile, energy absorption capability of structural materials has become important. TRIP (Transformation-induced Plasticity) steel is expected to apply to safety members because of excellent energy absorption capability and ductility. Past studies proved that such excellent characteristics in TRIP steel are domi...

In the present study, isothermal decomposition of austenite to bainite in 1.0 wt% carbon, 0.21% silicon steel during partitioning step a quenching and (Q&P) heat treatment has been investigated dilatometer temperature range 200 350 °C compared conventional austempering treatment. The transformation was shortened by about 75% presence pre-existing martensite (QP). kinetics is described well-...

in this study, the effects cold rolling and annealing parameters during thermomechanical processing of the aisi 201ln stainless steel were investigated. the cast samples were homogenized, hot-rolled and solution-annealed to acquire a suitable microstructure for the subsequent thermomechanical treatment. unidirectional and transverse multi-pass cold rolling at 25, 0 and -15 °c was carried out to...

Nanoindentation measurements were obtained on eight commercially-produced DP980 dual-phase steels to quantify the hardness of the individual constituents, ferrite and martensite, in each steel. Each microstructure was also evaluated to determine grain size, martensite volume fraction (MVF), and retained austenite content. Nanoindentation hardnesses and quantitative microstructural measurements ...

Strain-induced phase transformation and damage accumulation in austenitic stainless steel subjected to cyclic loading were investigated by nondestructive evaluation. The cyclic loading test was performed at various strain amplitudes at the same strain rate. The volume fraction of the strain-induced phase transformation (α′-martensite) was determined by ferrite scope and magnetic coercivity meas...

Stabilization of martensite and two way shape memory effect (TWSME) was studied in Cu-Ai-Mn alloys containing 9.7-11.8 wt% Al, and 3.0-9.25 wt% Mn, which were quenched to various temperatures. The transforming temperatures were in the range -70 to +220°C. The majority of alloys quenched directly to martensite did not show reverse transformation on heating due to stabilization and further temper...

The effect of long-term ageing (1000, 2000, and 3000 h) at 475 °C on mechanical properties, microstructure, substructure CUSTOM 465® maraging stainless steel was studied. additional precipitation nanometric particles ?-Ni3Ti phase in partly recovered lath martensite decomposition the BCC solid solution accompanied by formation Cr-rich ?’particles were identified. fraction reverted austenite fin...

Developing numerical methods for predicting microstructure in materials is a large and important research area. Two examples of material microstructures are Austenite and Martensite. Austenite is a microscopic phase with simple crystallographic structure while Martensite is one with a more complex structure. One important task in materials science is the development of numerical procedures whic...

We present results from a systematic study linking material microstructure to monotonic and fatigue properties of NiTi shape memory alloys. We consider Ni-rich materials that are either (1) hot rolled or (2) hot rolled and cold drawn. In addition to the two material processing routes, heat treatments are used to systematically alter material microstructure giving rise to a broad range of therma...

We present models of the microstructure of martensite that occurs when twinned layers of martensite meet a pure variant. This microstructure often occurs below the A, temperature, with loading that favors the passage from one pure variant of martensite to another. This microstructure gives a mechanism for variant rearrangement. In this microstructure, the layers are observed to pinch down to sh...