Transesterified vegetable oils (biodiesel) are promising alternative fuel for diesel engines. Used vegetable oils are disposed from restaurants in large quantities. But higher viscosity restricts their direct use in diesel engines. In this study, used cooking oil was dehydrated and then transesterified using an alkaline catalyst. The combustion, performance and emission characteristics of Used ...

Properties of biomass relevant to combustion are briefly reviewed. The compositions of biomass among fuel types are variable, especially with respect to inorganic constituents important to the critical problems of fouling and slagging. Alkali and alkaline earth metals, in combination with other fuel elements such as silica and sulfur, and facilitated by the presence of chlorine, are responsible...

Ilmenite (FeTiO3) is an important mineral, formed in igneous and metamorphic rocks, and is the main feedstock for the titanium industry. Ilmenite is also an attractive and inexpensive oxygen carrier for chemical-looping combustion (CLC), one of the most promising technologies to accomplish CO2 capture in power plants [1]. The technique uses solid metal oxides as an oxygen carrier, which transfe...

High-repetition-rate laser-induced fluorescence measurements of fuel and OH concentrations in internal combustion engines are demonstrated. Series of as many as eight fluorescence images, with a temporal resolution ranging from 10 micros to 1 ms, are acquired within one engine cycle. A multiple-laser system in combination with a multiple-CCD camera is used for cycle-resolved imaging in spark-ig...

In this part of the investigation, flow-field properties of hydrogen jets injected into a hypersonic flow are reported. The combustor has a single fuel injection parallel to the main flow from the base. The numerical simulation has been done with finite rate chemistry model using K-ε turbulence model. The results obtained through the numerical simulation of the cavity based fuel injectors are p...

Measures such as improved process design, operation, maintenance, housekeeping, and other management practices can reduce emissions. By improving combustion efficiency, the amount of products of incomplete combustion (PICs), a component of particulate matter, can be significantly reduced. Proper fuel-firing practices and combustion zone configuration, along with an adequate amount of excess air...

Study of gas fuel temperature influence on combustion performance by means of numerical modeling is a main objective of this work. Combustion of a single jet of propane in a cross-flowing stream of preheated and oxygen deficient air is analyzed. Both Eddy-Break-Up and PDF/mixture fraction combustion models coupled with RNG k-ε turbulent model were applied and compared. Thermal and prompt NOx mo...

Combustion system development in power generation is discussed ranging from the pre-environmental era in which the objectives were complete combustion with a minimum of excess air and the capability of scale up to increased boiler unit performances, through the environmental era (1970–), in which reduction of combustion generated pollution was gaining increasing importance, to the present and n...

a synthesis of doped ceria by combustion method is performed. two types of fuel such asurea and glycine is used to investigate the effect of fuel reactivity and reaction rate on themorphology of the resulted powders. thermo gravimetric analysis is carried out by (tg/dta,rigaku thermalplus tg 8120) to study the exo–endo temperature of as-received powder. thecrystalline phases are identified by x...

The aim was to identify relationships between combustion conditions, particle characteristics, and optical properties of fresh and photochemically processed emissions from biomass combustion. The combustion conditions included nominal and high burn rate operation and individual combustion phases from a conventional wood stove. Low temperature pyrolysis upon fuel addition resulted in "tar-ball" ...