The stress distribution on the tip of the cracks and the stress intensity factor on them are the main courses in the fracture mechanic. The stress intensity factor of the cracks with the different load exited and the different geometry are listed in the tables of the standard books. In all of them, the cracks are located in the central point of the plates. In the uniform edge loaded case, the c...

Objective: The main aim of this study was to compare fracture load and fracture mode of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) and metal-ceramic (MC) molar crowns using a modified test set-up to produce fractures similar to those seen in vivo, i.e. fractures of the veneering material rather than complete fractures. Materials and methods: 13 high-noble-alloy MC and 13 Y-TZP mo...

Study about Fracture Mechanics and the root cause of fracture in order to estimates lifetime for Mechanical parts in designing process and manufacturing have tremendous role in this realm. Stress intensity factor comes into design which not only is dependent to geometry also extremely to load condition; for instance, it is important in failure processes (brittle and ductile Materials) or to pre...

This study focused on the optimization of Al—Mg to CuZn34 friction stir lap welding (FSLW) process for optimal combination of rotational and traverse speeds in order to yield favorable fracture load using Grey relational analysis (GRA). First, the degree of freedom was calculated for the system. Then, the experiments based on the target values and number of considered levels, corresponding orth...

A subtrochanteric femur fracture after cannulated screw fixation of a femoral neck fracture is a devastating complication. We hypothesized that an apex-distal screw orientation would tolerate higher loads to subtrochanteric fracture. Human cadaveric femora were instrumented with three cannulated screws in either an apex-distal or an apex-proximal configuration. Specimens were loaded along the m...

In this paper, classical thin shell theory is used to analyze vibration and critical speed of simply supported rotating orthotropic cylindrical shell. The effects of centrifugal and Coriolis forces due to the rotation are considered in the present for‌mulation.. In addition, axial load is applied on cylinder as a ratio of critical buckling load. Finally the effects of orthotropic ratio, materia...

Objectives: To investigate and quantify fall height, surface depth, and surface impact attenuation as risk factors for arm fracture in children who fall from playground equipment. Design: Unmatched case control study. Setting: Five case hospitals and 78 randomly selected control schools. Participants: Children aged less than 13 years in Victoria, Australia who fell from school playground equipm...

OBJECTIVES To investigate and quantify fall height, surface depth, and surface impact attenuation as risk factors for arm fracture in children who fall from playground equipment. DESIGN Unmatched case control study. SETTING Five case hospitals and 78 randomly selected control schools. PARTICIPANTS Children aged less than 13 years in Victoria, Australia who fell from school playground equi...

The peel test is a popular test method for measuring the peeling energy between flexible laminates. However, when plastic deformation occurs in the peel arm(s) the determination of the true adhesive fracture energy, Gc, from the measured peel load is far from straightforward. Two different methods of approaching this problem have been reported in recently published papers, namely: (a) a simple ...

TiAlN/Al2O3 multilayers with different Ar/N2 ratios were deposited on Si substrates in different N2 partial pressure by magnetron sputtering. The crystalline and multilayer structures of the multilayers were determined by a glancing angle X-ray diffractometer (XRD). A nanoindenter was used to evaluate the hardness, the elastic modulus and scratch scan of the multilayers. The chemical bonding wa...