Surface grafting of polyelectrolyte brush, such as 3-sulfopropyl methacrylate potassium salt (SPMK), on hip implant materials has been reported to reduce the wear of the orthopaedic bearing surface. However, the biotribocorrosion behaviour of the SPMK brush has not been taken into consideration in previous research. In the present study, SPMK was grafted on Co28Cr6Mo alloy through photo-induced...

The corrosion inhibition of carbon steel in 1.0 mol L HCl in the presence of an antibacterial sulfa drug Sulfathiazole, IUPAC name 4-amino-N-(1,3-thiazol-2-yl) benzene sulfonamide (TBSA) was investigated using mass loss and electrochemical measurements such as: potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Surface chemistry was analyzed by X-ray photoelectron sp...

This paper studied the effects of reinforcement corrosion on bond performance between rebar and concrete. Tests were carried out to evaluate the degradation of bond between reinforcing steel and concrete for different corrosion levels of reinforcing steel. A series of 20 specimens of different concrete strength with various reinforcing steel corrosion levels were designed and manufactured. Each...

The electrochemical corrosion behavior of a silver-plated circuit board (PCB-ImAg) in a polluted marine atmosphere environment (Qingdao in China) is studied through a simulated experiment. The morphologies of PCB-ImAg show some micropores on the surface that act as the corrosion-active points in the tests. Cl- mainly induces microporous corrosion, whereas SO₂ causes general corrosion. Notably, ...

to improve the corrosion protection of copper metal, 0.01m concentration of 1h-1,2,4-triazole-3-thiol (tat) was incorporated into the hybrid sol-gel monolayers containing 3-glycidoxypropyltrimethoxysilane (gptms) and tetraethoxysilane (teos). it was further subjected to hydrolysis and condensation reaction to form a sol-gel matrix. the tat-doped hybrid sol-gel coating was applied over the coppe...

The effect of recasting, up to two times, Ni-Cr (DUCINOX) prosthetic alloy on its corrosion properties was carried out. The corrosion measurements were done in deoxygenated Fusayama Meyer artificial saliva solution at temperature of 37°C. In the study following electrochemical methods were used: measurement of free corrosion potential Ecor in open circuit, measurement of polarization resistance...

The effects of ultrasonic-aided quenching (USQ) on the microstructure and corrosion properties of 35CrMoV steel in a simulated seawater environment (wt % (NaCl) = 3.5) were studied. The corrosion properties of the steel were studied by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curves. The scanning electron microscope (SEM) and energy dispersive spectrometer (...

This paper reviews research carried out towards the development of a novel conductive coating for reinforced concrete structures in order to enable the application of electrochemical anti-corrosion treatments. The coating is composed of a hardened paste containing graphite powder and cement. The applied techniques were electrochemical chloride extraction (ECE), cathodic protection (CP), and cat...

This paper focused on the characterization of electrochemical behavior of a martensitic stainless steel in the acidic solutions. For this purpose, electrochemical parameters were derived from potentiodynamic polarization, Mott Schottky analysis and electrochemical impedance spectroscopy (EIS) techniques. The potentiodynamic polarization results showed that corrosion current density of AISI 420 ...

The corrosion of bronzes was examined in the context of single-acid versus mixed-acid (as in urban acid rain) solutions. Two bi-component bronzes (copper with either 3% Sn or 7% Sn) that closely represent those of historic artifacts were immersed for five weeks in conditions designed to replicate those experienced by statues and ornaments in cities where rainfall and humidity constantly produce...