Silicon Carbide Bipolar Junction Transistors for High Temperature Sensing Applications

MAX phases (M = transition metal, A = A-group element, and X = C/N) are of special interest because they possess a unique combination of the advantages of both metals and ceramics. Most attention is attracted to the ternary carbide Cr2AlC because of its excellent high-temperature oxidation, as well as hot corrosion resistance. Despite lots of publications, up to now the influence of bias voltag...

OBJECTIVE To study exposure to cobalt and chromium in saw maintenance rooms and test respiratory health among saw filers at lumber mills. Hard-metal lung disease is associated with cobalt in the manufacture of tungsten carbide tools; recently it has also been reported among tool maintenance workers. Lumber mills often use saws tipped with tungsten carbide or with a newer alloy, stellite (contai...

In this experimental study, three TiB2/Al metal matrix composites (MMCs) with 40 μm in mean size were produced using a melt stirring squeeze casting route. Test was carried out to find the parameters influencing surface roughness (Ra) and material removal rate (MRR) on machining the TiB2 reinforced Al-6063 composite materials. The orthogonal array, the signal-to-noise ratio, and analysis of var...

BACKGROUND The present study aimed at 3D analysis of adhesive remnants and enamel loss following the debonding of orthodontic molar tubes and orthodontic clean-up to assess the effectiveness and safety of One-Step Finisher and Polisher and Adhesive Residue Remover in comparison to tungsten carbide bur. MATERIALS AND METHODS Thirty human molars were bonded with chemical-cure orthodontic adhesi...

The aim of this study was to determine whether there was any difference in the degree of enamel loss at bond-up, debond and enamel clean-up when two different adhesive systems were tested and with four different methods of enamel clean-up. The adhesive systems were 37 per cent o-phosphoric acid with Transbond XT (group 1) and 10 per cent poly(acrylic acid) conditioner with Fuji Ortho LC (group ...

The purpose of this in vitro study was to evaluate the surface and resin-dentine interface characteristics of permanent tooth dentine cut with diamond or carbide burs and treated with phosphoric acid (PA) or an acidic conditioner. Labial surfaces of permanent incisors were prepared into dentine with high-speed carbide or diamond burs and divided into two halves. Phosphoric acid 36% was applied ...

This paper aims to compare the tribo-mechanical properties and structure–property relationships of a wear resistant cobalt-based alloy produced via two different manufacturing routes, namely sand casting and powder consolidation by hot isostatic pressing (HIPing). The alloy had a nominal wt % composition of Co–33Cr–17.5W–2.5C, which is similar to the composition of commercially available Stelli...

Coated carbide inserts are considered vital components in machining processes and advanced functional surface integrity of inserts and their coating are decisive factors for tool life. Atomic Force Microscopy (AFM) implementation has gained acceptance over a wide spectrum of research and science applications. When used in a proper systematic manner, the AFM features can be a valuable tool for a...