Laser beam welding for the dissimilar Titanium and Aluminium thin sheets is an emerging area which is having wider applications in aerospace, aircraft, automotive, electronics and in other industries due to its high speed, non-contact, precision with low heat effects, least welding distortion, low labor costs and convenient operation. Laser beam welding of dissimilar metal combinations are incr...

in this study, a new method for joining aluminum tubes in subsurface structures using steel converting and aluminum welding are presented and reviewed. but near the weld area is under high thermal cycle and will cause residual stresses in heat affected zone. therefore for assessment of proposed connection from the perspective of residual stress by using the finite element method welding of tube...

Submerged Arc welding process is automated and semiautomated high deposition down hand welding process not vertical or over welding process, The fundamental difference of this welding process is that the Arc is not visible it is submerged into the flux. Weldment is fully submerged the heat loss is minimum and the thermal efficiency is very high up to 80-90%. A constant power sources and control...

The paper deals with the optimization of welding parameters of friction stir welding of different Aluminium alloy groups. For this purpose 5 series Aluminium alloy Al 5083 and 6 series Aluminium alloy Al 6062 were taken .Tensile Strength test and micro structure analysis under various rotating speeds and tool profiles is conducted. It is observed that the increase in tool rotation speed and the...

There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...

The present investigation uses arc voltages, current, welding speed, wires feed rate and nozzle-to-plate distance as process parameters. Two level full factorial a technique has been used for experiment design. Multiple regression analysis has been used to develop a mathematical model to predict weld width using a single wire Submerged arc welding depositing bead-on-plate welds on 12mm plate. A...

Welding fumes are common ambient air pollutants in manufacturing facilities, and have been shown to have deleterious effects on human health. An experimental effort is conducted to study the formation and composition of respirable fumes from a SMAW process. The responses examined are the fume particle size distribution (mean diameter) and formation rate (particle number and mass concentration)....

The punchless welding point detection system using laser diagnostics for continuous strip production line has been developed. At the entrance of the steel strip production line, the preceding and following coils are welded for continuous processing. The welding point detection and tracking of the position is essential for the setup change of various important processing facilities according to ...

In this research work, an attempt has been made to examine the different welding parameters which affect the weldability of 304H Austenitic stainless steel (ASS) welded joint using the proper filler wire. Chemical composition of filler wire was same as that of base metal. Further this study addressed the combined effect of various welding parameters on the metallurgical and mechanical propertie...