In the present study, two types of tests (tensile strength test and polymerization inhibition test) were performed to evaluate the physical and chemical properties of four impression materials [a polysulfide (Permlastic), a polyether (Impregum), a condensation silicone (Xantopren) and a polyvinylsiloxane (Aquasil)] when polymerized in contact with of one conventional (Hemostop) and two experime...

Leaf-litter assays have advanced understanding of decomposition processes in both terrestrial and aquatic ecosystems. Some shortcomings inherent in the technique may be overcome through use of a cotton-strip assay. Key assumptions for using cotton strips as proxies for natural leaves are: 1) decomposition rates of the 2 materials are related, and 2) the materials decay in a similar way when exp...

Mortars containing carbon, polyethylene, and stainless steel fibers at the same volume fraction and with similar fiber diameters were compared in terms of tensile, compressive, and flexural properties. Carbon fibers, though having the lowest tensile modulus, stren[?th, and elongation at break among the fiber types, [?ave mortar of the highest tensile strenf?th and lowest cost; polyethylene fibe...

Strain rate and temperature dependence of the tensile strength of single-wall carbon nanotubes has been investigated with molecular dynamics simulations. The tensile failure or yield strain is found to be strongly dependent on the temperature and strain rate. A transition state theory based predictive model is developed for the tensile failure of nanotubes. Based on the parameters fitted from h...

Tetragonal ferroelectric/ferroelectric BaTiO(3)/PbTiO(3) superlattice under uniaxial tensile stress along the c axis is investigated from first principles. We show that the calculated ideal tensile strength is 6.85 GPa and that the superlattice under the loading of uniaxial tensile stress becomes soft along the nonpolar axes. We also find that the appropriately applied uniaxial tensile stress c...

due to their widespread availability, sandstones are commonly used as a natural stone for buildings, monuments and sculptures. in thecurrent study, nine sandstone samples from the upper red formation (specified by the letters a, b, c, cg, s, s1, sh, tr and min)were studied from a petrophysical point of view and their durability was evaluated. then, their suitability as building stones wasassess...

With regard to previous tensile deformation models simulating the tensile behavior of in-situ dendrite-reinforced metallic glass matrix composites (MGMCs) [Qiao et al., Acta Mater. 59 (2011) 4126; Sci. Rep. 3 (2013) 2816], some parameters, such as yielding strength of the dendrites and glass matrix, and the strain-hardening exponent of the dendrites, are estimated based on literatures. Here, Ti...

A self-developed rotary multi-cutter device cuts stainless steel wire ropes into segments to fabricate twisted wires. Stainless steel porous twisted wire materials (PTWMs) with a spatial composite intertexture structure are produced by the compaction and subsequent vacuum solid-phase sintering of twisted wires. The stainless steel PTWMs show two types of typical uniaxial tensile failure modes, ...