In recent years, biosorption is being considered as an environmental friendly technology for the recovery of rare earth metals (REE). This study investigates the optimal conditions for the biosorption of neodymium (Nd) from an aqueous solution derived from hard drive disk magnets using green microalgae (Chlorella vulgaris). The parameters considered include solution pH, temperature and biosorbe...

The effect of temperature on the equilibrium sorption of Pb 2+ from aqueous solution onto a low-cost electric furnace slag was investigated. In this paper, two-parameter isotherm models namely the Langmuir and the Freundlich and three-parameter isotherm model namely Redlich–Peterson were applied to describe the isotherms and to calculate their constants. The best estimation of the parameters of...

This article compares the sorption behaviour of 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol, pentachlorophenol, chlorotriazine atrazine, methylthiotriazine ametryn, methoxytriazine atratone, hydroxyatrazine, and didelakylated atrazine in a topsoil and an aquifer sediment before and after removal of sorbent organic matter and in humic acid. Freundlich isotherm coefficients Kf and 1/n and fr...

The potential use of Croatian natural zeolite clinoptilolite as alternative adsorbents for removal of enrofloxacin (ENRO) as model pollutant was studied in a batch system. The influence of contact time and initial ENRO concentration on the sorption process was investigated. The percentage removal of ENRO from aqueous phase decreased with an increase in initial concentration. The experimental da...

background: the presence of even a very small quantity of dye in water bodies is undesirable and affects the water bodies. dye removal from industrial waste water is significant; hence in this study, a material that is an economical waste product was employed to test its acid dye removing capacity from aqueous solution. methods: in this study, batch mode experiments were performed in the sorpti...

Arsenic (As) originates in many rocks and minerals throughout the world. Natural phenomena, such as weathering and biological activities, along with industrial activities and agricultural activities are responsible for As introduction to the environment. The most predominate oxidation states for inorganic As species are arsenate As (H3AsO4) and arsenite As (H3AsO3). In addition to inorganic for...

Rice straw charcoal, soot and fly ash (collectively termed "black carbon" or BC), which were found to widely exist in the environment and exhibit strong sorption of many organic compounds, were prepared for this study, and recorded as RC, SC, and FC, respectively. The characterization, sorption isotherm, and the effect of pH (from 3.0 to 9.0) on sorption capacity of each BC were investigated. I...

Adsorption characteristics of potentially toxic metals in single- and multi-metal forms onto ferronickel slag were evaluated. Competitive sorption of metals by ferronickel slag has never been reported previously. The maximum adsorption capacities of toxic metals on ferronickel were in the order of Cd (10.2 mg g(-1)) > Cu (8.4 mg g(-1)) > Zn (4.4 mg g(-1)) in the single-metal adsorption isotherm...

the thin gelatin films, prepared by casting of gelatin solutions at different drying temperatures, had different molecular morphologies as monitored, using wide angle x-ray diffraction (waxd) and differential scanning calorimetry (dsc) techniques. it was revealed that gelatin films dried at lower temperatures showed markedly higher crystalline or helical structure with slightly higher tg and lo...

The sorption isotherm of a multiwall carbon nanotube in paraxylene is investigated through a pressure induced infiltration experiment. The inner space of the carbon nanotubes can be occupied by liquid molecules when an external pressure is applied so that the energy barrier caused by the lyophobic surface is overcome. The infiltration–defiltration curve is highly hysteretic, and therefore a sig...