A potentiometric analyzer, developed to directly measure potassium and sodium concentrations, was evaluated on aqueous solutions, whole blood, serum, and plasma. The analyzer consists of three electrodes-sodium, potassium, and reference-mounted in a fIowcell configuration, and a modified digital pH meter, which displays the ion concentrations directly. Volume of the cell is about 100 l. The ele...

A simple lamination process of the top electrode for perovskite solar cells is demonstrated. The laminate electrode consists of a transparent and conductive plastic/metal mesh substrate, coated with an adhesive mixture of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), PEDOT:PSS, and sorbitol. The laminate electrode showed a high degree of transparency of 85%. Best cell performance was...

This work presents a flexible miniaturized ion-selective sensor consisting of a solidcontact reference electrode (RE) and ion-selective electrodes (ISE) fabricated on the same foil. The flexible ion sensor was based on AgCl electrodes screen printed on polyethylene terephthalate foil. The RE was formed by casting a mixture of plasticized polyvinylchloride (PVC) and KCl on the AgCl electrode. Th...

An overview is given dealing with the application of ion-selective electrodes (ISEs) in environmental analysis. ISEs are placed into the context of the trend of development of sensors for extensive and frequent monitoring. Discussed are the issues such as sensing platforms and their mass-production, improvement of precision, diagnostic of sensor functionality, and development of reference elect...

In this work, thin film yttria-stabilized zirconia [YSZ] solid electrolytes were sputtered onto insulating substrates at room temperature and 600oC in order to produce different average grain sizes (~15-50 nm). For reference, polished samples of single crystal and bulk, poly-crystalline YSZ were also used. Platinum film electrodes were then sputtered on top and lithographically patterned to giv...

We report on graphene-passivated ferromagnetic electrodes (GPFE) for spin devices. GPFE are shown to act as spin-polarized oxidation-resistant electrodes. The direct coating of nickel with few layer graphene through a readily scalable chemical vapor deposition (CVD) process allows the preservation of an unoxidized nickel surface upon air exposure. Fabrication and measurement of complete referen...

Introduction In the original evaluation of the Nova 2 analyser [1] inter-electrode differences were shown which would have necessitated the re-establishment of the ionised calcium reference range each time that the calcium ion-selective electrode was changed. The manufacturers (Nova Biomedical, Newtown, Mass, USA) have now replaced the electrodes which showed slow and variable response times to...

The reproducibility of the pull-in voltage of a single side clamped free-standing beam has been investigated for application as a DC voltage reference. A 2 mm long beam has been fabricated in an epipoly process with, at the tip, poly-poly electrodes extending into the axial direction for electrostatic lateral deflection and a combdrive operating in the normal lateral beam direction. The DC volt...

We report the fabrication and characterisation of the first graphene ring micro electrodes with the addition of a miniature concentric Ag/AgCl reference electrode. The graphene ring electrode is formed by dip coating fibre optics with graphene produced by a modified Hummers method. The reference electrode is formed using an established photocatalytically initiated electroless deposition (PIED) ...

There is no uniformity in the published literature from different laboratories on the optimal electrode configuration for recording nerve action potentials, and a number of standard texts omit any reference to the effects that interelectrode distance and electrode orientation can have on the shape, amplitude and latency of nerve action potentials. The sensory action potential from the digital n...