The effects of increased gravity in the head-to-foot direction (+G(z)) and pressurization of an anti-G suit (AGS) on total and intraregional intra-acinar ventilation inhomogeneity were explored in 10 healthy male subjects. They performed vital capacity (VC) single-breath washin/washouts of SF(6) and He in +1, +2, or +3 G(z) in a human centrifuge, with an AGS pressurized to 0, 6, or 12 kPa. The ...

In the present study, the evolution of microstructure in laser-welded joints of ferrite-based dual-phase Fe-Al-Mn-C steel sheets was analyzed and its effect on the mechanical properties of the joints was investigated. Laser welding was performed using different powers and welding speeds to attain different heat inputs. Electron backscatter diffraction (EBSD) examinations and hardness measuremen...

Introduction Echo-planar imaging (EPI) is a group of fast data acquisition methods commonly used in fMRI studies. It acquires multiple image lines in k-space after a single excitation, which leads to a very short scan time. A well-known problem with EPI is that it is more sensitive to distortions due to the used encoding scheme. Source of distortion is inhomogeneity in the static B0 field that ...

Co-Zn ferrite and BaM ferrite films were deposited on silicon wafer disks with thermally oxidized surface layer without annealing process, and their readlwrite characteristics in contact mode have been investigated by using a MIG and Mn-Zn ferrite head with gap length of 0.2-0.4 pm. The highest linear recording density D50 of Co-Zn ferrite and Ba ferrite films were 105 and 190 WRPI, respectivel...

Cubic copper ferrite CuFe2O4 nanopowders have been synthesized via a hydrothermal route using industrial wastes. The synthesis conditions were systematically studied using statistical design (Box–Behnken Program) and the optimum conditions were determined. The results revealed that single phase of cubic copper ferrite powders can be obtained at different temperatures from 100 to 200 C for times...

In the present paper, effect of initial stresses on the propagation of Love waves has been investigated in a fluid saturated, anisotropic, porous layer lying in welded contact over a prestressed, non-homogeneous elastic half space. The dispersion equation of phase velocity has been derived. It has been found that the phase velocity of Love waves is considerably influenced by porosity and anisot...

this paper provides an overview on obtaining low-carbon ultra-fine grained dual-phase steels through rapid intercritical annealing of cold-rolled sheet as improved materials for automotive applications. a laboratory processing route was designed that involves cold-rolling of a tempered martensite structure followed by a second tempering step to produce a fine grained aggregate of ferrite and ca...

The present paper studies the possibility of propagation of torsional surface waves in an inhomogeneous anisotropic layer lying between two heterogeneous half-spaces (upper and lower half-space). Both the half-spaces are assumed to be under compressive initial stress. The study reveals that under the assumed conditions, a torsional surface wave propagates in the medium. The dispersion relation ...

       In this work, Mn ferrite nanopowders were prepared by co-precipitation method and were characterized. Phase identification of the nanopowders was performed by X-ray diffraction method and the mean particle size of the nanopowders was calculated by Scherrer's formula, using necessary corrections. Magnetic parameters of the prepared nanopowders were measured by a vibrating sample magnetome...

The reaction mechanism for conversion of MnO nanoparticles to Mn-ferrite nanoparticles was studied, which involved sequential consumption of MnO and the growth of ferrite. The method could be applied to other ferrite nanoparticles including cobalt ferrite.