This study investigated the joint properties of Fe-Pt alloy laser-welded to Co-Cr alloy. Cast plates (0.5 x 3.0 x 10 mm) were prepared with Fe-Pt and Co-Cr alloys. Fe-Pt plates were butted against Co-Cr plates and laser-welded using Nd:YAG laser. Control and homogeneously welded specimens were also prepared. Laser welding was performed with and without argon shielding. Tensile testing was condu...

As a new treatment process after welding, the process parameters of laser shock peening (LSP) in dynamic strain aging (DSA) temperature regimes can be precisely controlled, and the process is a non-contact one. The effects of LSP at elevated temperatures on the distribution of the surface residual stress of AA6061-T6 welded joints were investigated by using X-ray diffraction technology with the...

In this study, 7075 aluminum alloy with a thickness of 10 mm was successfully welded with no obvious defects by pulsed variable polarity plasma arc (PVPPA) welding. The mechanical properties of PVPPA welded joints have been researched by post weld heat treatment (PWHT). The results indicate that the heat treatment strongly affects the mechanical properties of the welded joints. The tensile stre...

Ultrasonic peening treatment (UPT) as a method of severe plastic deformation was used to treat cruciform welded joints of Q345 steel. The application of UPT achieves material surface nanocrystallization of the peening zone, reduces stress concentration, and produces residual compressive stresses at the welded toe. Micro-structure, hardness, stress relief, S-N curve, and the fatigue fracture mec...

NONE of us could imagine delivering an inhalational anesthetic in the absence of oxygen. It wasn’t always that way. In this issue of ANESTHESIOLOGY, George S. Bause, M.D., presents the unlikely history behind the recognition that specialized equipment is necessary to deliver both oxygen and anesthetics in a controlled manner. This article and its attendant cover image provide a platform for int...

Introduction. Friction stir welding is widely used due to certain advantages of this method. Factors that reduce the strength joints made high-strength aluminum alloys are considered. When flat sheets, an effective way increase weld edge thickening. The paper proposes a method for such A device developed, calculations and experiments carried out. Materials Methods. Laboratory equipment has been...

In the present study, parameters of tool rotation speed, tool travel speed and tool offsetting with different levels were used in the friction stir welding (FSW) of aluminum-copper tailor welded blanks (TWBs). The FSW of pure copper to 5052 aluminum alloy were carried out by varying tool rotation speed from 800 rpm to 1200 rpm, tool travel speed from 40 mm/min to 80 mm/min and tool offsetting f...

Linoleic, oleic, and stearic fatty acids, presented vapor-phase retronasally, were discriminable from blanks and each other, but the same concentrations, oral-cavity-only (OCO), were not discriminable from blanks. It remained possible that higher concentrations might be discriminable OCO. To evaluate this, participants attempted to discriminate undiluted linoleic, oleic, or stearic acids, vapor...