In this paper the changes in the heat capacity of cooling towers has been investigated as a result of injecting combustion products of boilers. In the tower, the air is re-heated through mixing with hot flue gas after passing through the heat exchangers. As a result of this process, the draft of the cooling tower is increased. The additional produced draft depends on the ambient temperature and...

A mathematical engine model is developed in this paper to study the operation process in HCCI engines. Isooctane is used as fuel for testing in this model. Two-step reaction mechanisms are implemented to model combustion process and heat transfer process is also included. Results from this model show good correlation with experiment with respect to combustion phasing, pressure rise and peak pre...

methanol as a biofuel is an environmental friendly substitute to pure diesel and can be obtained from biomasses. use of biofuels such as methanol for combustion process is associated with positive environmental impacts. using pure methanol or blended with diesel fuel in automotive has been proposed by researchers. in this paper, methanol was injected into combustion chamber of a ism 370 hd dies...

nanocrystalline zro2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. the overall process involved three steps: formation of homogeneous sol at 50-55°c; formation of dried gel at 110°c, and combustion of the dried gel at 400°c. experiments revealed that zro2 dried gel derived from glycine (fuel) and nitrate sol exhibited self propagating combustion a...

Contour Advection with Surgery (CAS) is used to simulate turbulent premixed combustion. This paper presents results from calculations of methane/air mixtures and ethylene/air mixtures with equivalence ratios ranging from 0.8 to 1.6 with different turbulence intensities. The positions, thicknesses and half-angles of the turbulent flame zones are compared for each case by plotting contour maps of...

Investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (LHR) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].The engine had different operating conditions...

Flaring of waste gases is a common practice in the processing of hydrocarbon (HC) materials. It is assumed that flaring achieves complete combustion with relatively innocuous byproducts such as CO2 and H2O. However, flaring is rarely successful in the attainment of complete combustion, because entrainment of air into the region of combusting gases restricts flame sizes to less than optimum valu...

List of old and new concepts of ICE thermodynamic improvements considering realistic limits of both mechanical and thermal stress and pollutant emissions, especially new concepts of combustion (HCCI-like), piston motion control, consequences of downsizing, possibilities of waste heat recovery and heat regeneration. Methods of simulation for conceptual optimization in hierarchy of procedures. Im...

Fossil fuels such as standard gasoline and diesel fuel are the most important source of energy for our society today, providing the bulk of global energy requirements for transportation, construction, heating, and agriculture. Many new developments in technology have made alternative sources of energy more economically feasible including advances in solar, wind, geothermal and nuclear energy. I...

Nanocrystalline ZrO2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. The overall process involved three steps: formation of homogeneous sol at 50-55°C; formation of dried gel at 110°C, and combustion of the dried gel at 400°C. Experiments revealed that ZrO2 dried gel derived from glycine (Fuel) and nitrate sol exhibited self pr...