Advanced carbon dioxide-cooled nuclear reactor environments can be tribologically hostile, with steel components sliding in contact at high temperatures. Although wearprotective oxides can reduce damage in the steady-state conditions, severe wear can occur in the early stages, particularly at temperatures of 300 to 500 "C, where oxidation rates may be low. In this paper, results are presented o...

The effect of T6 heat treatment on the microstructure and wear behavior of Al-332 piston alloy containing 1.2wt% iron was investigated. The results showed that the T6 heat treatment changed the morphology of acicular eutectic Si particles to a more spherical form. The heat treatment also reduced the average length and blunted the needle-like ?- phase intermetallics through dissolution and fragm...

In gears running under conditions of high load and low circumferential speed the lubricant film thickness is often not sufficient to fully separate the mating surfaces. Wear of the gear flanks can occur and can even result in total gear failure. For a given gear geometry the main influencing parameters are load, circumferential speed and lubricant. The wear characteristics of lubricants depend ...

This study presents structural and mechanical properties of WO3 thin films deposited on glass substrates at different temperatures by radio frequency reactive magnetron sputtering. WO3 films deposited at temperatures up to 200uC are found as amorphous, but crystalline at 300 and 400uC. Chemical analysis reveals the overstoichiometry of the films. The diffusion of sodium ions from glass substrat...