The three pass differential interferometry technology is an important means of ground deformation monitoring, which has been successfully used in the large ground deformation monitoring and research such as the earthquake, volcano activity, glacial drift, landslides, and city settlement etc. However the technology is affected by multiple errors in practical application, which have serious influ...

We study experimentally the dynamical heterogeneities occurring at slow shear, in a model amorphous glassy material, i.e., a 3D granular packing. The deformation field is resolved spatially by using a diffusive wave spectroscopy technique. The heterogeneities show up as localized regions of strong deformations spanning a mesoscopic size of about 10 grains and called the "hot spots." The spatial...

Abstract To achieve a desired microstructure and minimize the thickness variation in rolled foils, researchers must understand effects of foil fabrication process variables on evolution. We developed an integrated simulation deformation recrystallization that employs finite element method (FEM) kinetic Monte Carlo (KMC) Potts model, respectively, to investigate evolution during multiple-pass ho...

Among all recognized severe plastic deformation techniques, a new method, called the equal channel forward extrusion process, has been experimentally studied. It has been shown that this method has similar characteristics to other severe plastic deformation methods, and the potential of this new method was examined on the mechanical properties of commercial pure aluminum. The results indicate t...

In engineering materials, microstructural evolution during hot-working critically determines the properties of the finished part. Intermetallic TiAl alloys are no exception and numerous attempts have been made to improve their performance by subjecting them to harmonized hot-working steps. In the current work a novel in-situ diffraction technique along with conventional microscopic methods were...

Hot deformation behavior of the Cu-Cr-Zr-Nd alloy was studied by hot compressive tests in the temperature range of 650-950 °C and the strain rate range of 0.001-10 s(-1) using Gleeble-1500D thermo-mechanical simulator. The results showed that the flow stress is strongly dependent on the deformation temperature and the strain rate. With the increase of temperature or the decrease of strain rate,...

In this study, SiC nanoparticles were added into matrix alloy through a combination of semisolid stirring and ultrasonic vibration while dynamic precipitation of second phases was obtained through multi-pass forging with varying temperatures. During single-pass forging of the present composite, as the deformation temperature increased, the extent of recrystallization increased, and grains were ...

The microstructure and texture evolution of Ti-5Al-5Mo-5V-1Cr-Fe alloy during hot compression were investigated by the electron backscatter diffraction technique. The results reveal that two main texture components containing <100> and <111> fiber textures form after the hot compression. The fraction of each component is mainly controlled by deformation and strain rate. Dynamic strain-induced b...

A three-phase model is presented that predicts solid deformation and damage as well as melt pressure, feeding flow and shrinkage porosity during metal casting. A visco-plastic constitutive theory with damage is used to model the solid deformation. Damage created by mechanically induced voiding is used as a hot tear indicator. The absence of liquid feeding determines when damage starts to form. ...