Stabilization of martensite and two way shape memory effect (TWSME) was studied in Cu-Ai-Mn alloys containing 9.7-11.8 wt% Al, and 3.0-9.25 wt% Mn, which were quenched to various temperatures. The transforming temperatures were in the range -70 to +220°C. The majority of alloys quenched directly to martensite did not show reverse transformation on heating due to stabilization and further temper...

Developing numerical methods for predicting microstructure in materials is a large and important research area. Two examples of material microstructures are Austenite and Martensite. Austenite is a microscopic phase with simple crystallographic structure while Martensite is one with a more complex structure. One important task in materials science is the development of numerical procedures whic...

We present models of the microstructure of martensite that occurs when twinned layers of martensite meet a pure variant. This microstructure often occurs below the A, temperature, with loading that favors the passage from one pure variant of martensite to another. This microstructure gives a mechanism for variant rearrangement. In this microstructure, the layers are observed to pinch down to sh...

Martensitic and bainitic steels are two types of widely used steels with excellent mechanical behaviors in automatic industry. It’s universally acknowledged that asquenched martensite possesses poor ductility and impact toughness, which should be tempered before putting into application. During tempering, as-quenched martensite changes from a hard and brittle microstructure to more ductile and ...

Magnetic Shape-Memory (MSM) materials are a new category of actuator materials with the potential to produce both large actuator strain and rapid response. To explore the possibility of developing MSM materials based on Fe-Ni-Co-Ti alloys, the effects of chemical composition (Co/Ni ratio) and ausaging on microstructure and magnetic shapememory response were studied. A suitable choice of chemica...

Article history: Received 29.05.2012. Received in revised form 27.07.2012 Accepted 03.09.2012. The influence of sub-temperature quenching temperature on the tensile strength, hardness and toughness of 60Si2Mn steel has been studied, and the ferrite content, austenite grain size and martensite morphology of the microstructure of this steel after sub-temperature quenching analyzed. The results sh...

Bragg-edge neutron transmission imaging, a wavelength-resolved imaging method, is unique method for materials characterization. This can quantitatively visualise various crystalline microstructural information in bulk material over several-centimetres with sub-millimetre spatial resolution. In forms of information, the martensite phase fraction ferritic steel significant characterisation of, e....

In the past few years, extensive improvements have been accomplished in reinforcing the structures through using shape memory alloys (SMAs). These materials absorb or dissipate energy through establishing a reversible hysteresis loop during a cyclic mechanical loading. This unique characteristic of the SMAs has made them appropriate for sensing, actuation, absorbing the impact energy, and vibra...

We are interested in the phase transformation from austenite to martensite. This transformation is typically accompanied by the generation and growth of small inclusions of martensite. We consider a model from geometrically linear elasticity with sharp energy penalization for phase boundaries. Focusing on a cubic-to-tetragonal phase transformation, we show that the minimal energy for an inclusi...

The Ginzburg-Landau theory for multivariant martensitic phase transformations is advanced in three directions: the potential is developed that introduces the surface tension at interfaces; a mixed term in gradient energy is introduced to control the martensite-martensite interface energy independent of that for austenite-martensite; and a noncontradictory expression for variable surface energy ...