This paper presents a fatigue assessment model that was developed for corroded reinforced concrete (RC) beams strengthened using prestressed carbon fiber-reinforced polymer (CFRP) sheets. The proposed model considers the fatigue properties of the constituent materials as well as the section equilibrium. The model provides a rational approach that can be used to explicitly assess the failure mod...

This study presents the shear performance and the modes of failure of reinforced concrete (RC) beams strengthened with externally bonded carbon fiber reinforced polymer (CFRP) wraps. The experimental program consisted of testing twenty-seven, full-scale, RC beams. The variables investigated in this research study included steel stirrups (i.e., beams with and without steel stirrups), shear span-...

This paper presents a data fusion method between the results of ultrasound using phased array at 5MHz frequency and those obtained through eddy current examination at 1-10MH frequency. The obtained results are compared with destructive tests, a very good correlation being obtained. The effects of delamination over the properties of CFRP are studied using dynamic mechanical analyzer, emphasizing...

This paper studies the behavior of axially loaded RC columns which are confined with carbon fiber reinforced polymers’ sheet (CFRP) and steel jackets (SJ). The study is based on twelve tested up to failure. It divided into three schemes its strengthening type; each scheme has four columns. main parameters in this were compressive strength concrete reinforcement ratio. Furthermore, results exper...

The present study examines the shear performance and modes of failure of rectangular simply supported reinforced concrete (RC) beams designed with shear deficiencies. These members were strengthened with externally bonded carbon fiber reinforced polymer (CFRP) sheets and evaluated in the laboratory. The experimental program consisted of twelve full-scale RC beams tested to fail in shear. The va...

INTRODUCTION Intervertebral spacers are made of different materials, which can affect the postfusion magnetic resonance imaging (MRI) scans. Susceptibility artifacts, especially for metallic implants, can decrease the image quality. This study aimed to determine whether magnesium as a lightweight and biocompatible metal is suitable as a biomaterial for spinal implants based on its MRI artifacti...