An immense problem affecting environmental pollution is the increase of waste tyre vehicles. In an attempt to decrease the magnitude of this issue, crumb rubber modifier (CRM) obtained from waste tyre rubber has gained interest in asphalt reinforcement. The use of crumb rubber in the reinforcement of asphalt is considered as a smart solution for sustainable development by reusing waste material...

This paper presents a computational modeling study of the microstructural influence on damage behavior of asphalt materials. Computer generated asphalt samples were created for numerical simulation in indirect tension and compression testing geometries. Our previously developed micromechanical finite element model was used in the simulations. This model uses a special purpose finite element tha...

The ability to classify asphalt surfaces is an important goal for the selection of suitable non-variant targets as pseudo-invariant targets during the calibration/validation of remotely-sensed images. In addition, the possibility to recognize different types of asphalt surfaces on the images can help optimize road network management. This paper presents a multi-resolution study to improve aspha...

The use of recycled materials in pavement construction has seen, over the years, a significant increase closely associated with substantial economic and environmental benefits. During the past decades, many transportation agencies have evaluated the effect of adding Reclaimed Asphalt Pavement (RAP), and, more recently, Recycled Asphalt Shingles (RAS) on the performance of asphalt pavement, whil...

To determine the behavior of hot mix asphalt including different penetration grade bitumen has been a major subject of paving engineering. In this study the effects of different penetration grade binders on the mechanical properties of hot mix asphalt were investigated with four different tests. The specimens prepared with AC-5, AC-10, AC-20 and SBS modified AC-10. The stiffness modulus, creep ...

The Indirect Tension Test (IDT) is frequently used for evaluation of asphalt material viscoelastic creep properties. With the increased use of finer aggregate gradations and polymer modified asphalt binders in asphalt materials, crushing can occur under the narrow loading heads. The new specimen configuration proposed has a trimmed area under the loading heads, creating a “flattened-IDT.” This ...

A new composite membrane system, Geo-SealTM, has been developed that offers exceptional chemical resistance for use as a vapor barrier at brownfield sites. Data generated in controlled laboratory conditions indicate the composite membrane to have < 0.2X the volatile organic compound partitioning when compared to spray applied latex/asphalt vapor barriers. More importantly, data generated under ...

an experimental program was conducted to determine the effects of geosynthetic reinforcement on mitigating reflection cracking in asphalt overlays. the objectives of this study were to asses the effects of geosynthetics inclusion and its placement location on the accumulation of permanent deformation. to simulate an asphalt pavement overlaid on top of a crack in a concrete or asphalt pavement, ...

Rutting is one of the most important distresses in asphalt pavements due to its frequency. Rutting or channeling, could be classified in three types: 1) mechanical deformation (rutting in subgrade or base), 2) plastic flow (unstable asphalt layer), and 3) wheel path consolidation. The plastic flow of bituminous mixture depends on many factors; one of this is the type of asphalt used in the mixt...

Permeability of an asphalt pavement is one of the most important parameters that have a direct influence on its design life. It is an intrinsic property that relates the average fluid velocity to a constant pressure gradient; however, the external pressures on a saturated pavement pore structure are often dynamic due to the repeated tire loading in the field. A dynamic permeability constant, th...