Water Fast of Inkjet Print by Using Acrylic /Nano-Silver Ink

نویسندگان

  • A. Soleimani-Gorgani Department of Printing Science and Technology, Institute for Color Science and Technology
  • M. Pishvaei Departments of Resin and Additives, Institute for Color Science and Technology
چکیده مقاله:

A colour ink jet printing with improved water fastness property was produced by using of special component in the ink’s formulation. In this study, the water fastness of ink jet prints which used acrylic/nano-silver resin nano-composite ink instead of conventional resin in ink’s formulation was examined. The nano composite resin was prepared via miniemulsion polymerization of acrylate monomers in the presence of silver nanoparticles. The water fastness properties of the prints were assessed by using the ASTM /F2292-03 water fastness test. The results indicated that acrylic/nano-silver resin increased impermeability of the printed paper and provided the water insoluble printed image on the paper. Also by adding acrylic/nano-silver resin, the hue of printed image was darker than conventional resin.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Purification of inkjet ink from water using liquid phase, electric discharge polymerization and cellulosic membrane filtration.

A method to separate inkjet ink from water was developed using a liquid phase, electric discharge process. The liquid phase, electric discharge process with filtration or sedimentation was shown to remove 97% of inkjet ink from solutions containing between 0.1-0.8 g/L and was consistent over a range of treatment conditions. Additionally, particle size analysis of treated allyl alcohol and treat...

متن کامل

INKJET DEPOSITED SILVER NANOPARTICLE ELECTRODES

Silver nanoparticles are being given considerable attention because of their interesting properties and potential applications. One such exploitable use is as the major constituent of conductive inks and pastes used for printing various electronic components. This paper presents a novel direct-writing process for fabrication of the first deposited silver nanoparticles (AgNPs) (50-200nm) elec...

متن کامل

synthesis of amido alkylnaphthols using nano-magnetic particles and surfactants

we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.

15 صفحه اول

Scanning Parameter Selection for Inkjet Print Analysis

Noise in inkjet prints can be influenced by many factors, such as halftone pattern, dot size, dot color and ink coalescence. The measurement of various image noise characteristics, such as random graininess and banding, is often needed as part of system design and optimization. We consider the imaging requirements for a scanner used for inkjet printer evaluation. Methods to assess the influence...

متن کامل

Modified Deinking of Digitally Printed Paper with Water Based Inkjet Ink

One of the most difficult recycling tasks is deinking of digitally printed paper with water based inkjet inks. The deinking of such paper is very important for the improvement of the digital printing industry. Generally, the manufacturers’ preferred method is INGEDE Method 11p, which defines the universal deinking process. Based on this method, two different deinking procedures were assessed. T...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره 2

صفحات  79- 83

تاریخ انتشار 2011-08-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023