Using Pattern Search Algorithm and Finite Element Method to Detect Rotor Cracks

نویسندگان

  • Hassan Nahvi Mechanical Engineering, Isfahan University of Technology
چکیده مقاله:

The vibration pattern of a rotor system reflects the mechanical parameter changes in the system. Hence, the use of vibration monitoring is considered as a possible means of detecting the presence and growth of the cracks. In this paper, a pattern search based method for shaft crack detection is proposed and described which formulates the shaft crack detection as an optimization problem by means of the finite element method and utilizes the pattern search algorithm to search the solution. Using a direct search method avoids some of the weaknesses of the traditional gradient based analytical search method, including the difficulty in constructing well-defined mathematical models directly from practical inverse problems. First, a finite element code was developed for analyzing a rotor system with open cracks. To extract the flexibility matrix of an element containing cracks an exact integration scheme was adopted which is more accurate than the conventional methods. Then, the crack detection method was formulated as an inverse problem which can be solved by optimization algorithms. The numerical simulations suggest that good predictions of shaft crack location and depth are possible and the proposed method is feasible.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

optimization of composite rotor blade using merged genetic algorithm and finite element method

in this paper, an optimization method for both weight and displacement of composite blades is presented. in   order to hold issues such as aerodynamics and acoustic unchanged, airfoil shape during optimization process remained constant. to achieve the ultimate goal, only blade lamination was changed. in order to achieve minimum weight for each part of the structure, the lowest layers are foreca...

متن کامل

Identification of Multi-cracks in the Gate Rotor Shaft Based on the Wavelet Finite Element Method

In order to have fault identification for the gate rotor shaft with multiple cracks effectively, the quantity identification method of the gate rotor shaft with multiple cracks based on wavelet finite element method is established and the frequency test of the gate rotor shaft based on blind source separation algorithm is analyzed. Firstly the wavelet finite element was established by combining...

متن کامل

Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method

Low weight and high load capacity are remarkable advantages of sandwich panels with corrugated core, which make them more considerable by engineering structure designers. It’s important to consider the limitations such as yielding and buckling as design constraints for optimal design of these panels. In this paper, multi-objective optimization of sandwich panels with corrugated core is carried ...

متن کامل

Updating finite element model using frequency domain decomposition method and bees algorithm

The following study deals with the updating the finite element model of structures using the operational modal analysis. The updating process uses an evolutionary optimization algorithm, namely bees algorithm which applies instinctive behavior of honeybees for finding food sources. To determine the uncertain updated parameters such as geometry and material properties of the structure, local and...

متن کامل

Finite Element Method Simulation of Photoinductive Imaging for Cracks

In this paper, the numerical simulations of photoinductive imaging (PI) method have been performed using the finite element method (FEM) with the 2D transient to characterize corner cracks at the edge of a bolt hole. The PI imaging results have higher spatial resolution in the area of the defect in 2D models as compared with the conventional eddy current (EC) images. The FEM simulation results ...

متن کامل

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 22  شماره 2

صفحات  195- 204

تاریخ انتشار 2009-06-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023