Ultrasonic-assisted solvothermal synthesis of self-assembled Copper Ferrite nanoparticles
نویسندگان
چکیده مقاله:
The aim of this work was to characterize copper ferrite nanoparticles synthesized via solvothermal method and to investigate the effects of ultrasonic waves on the synthesis efficiency. Crystal structure, functional groups, microstructure, particle size, magnetic properties, specific surface area, porosity distribution and photocatalytic activity of the synthesized nanoparticles were also investigated. Structural analyses revealed that nanostructured copper ferrites with spinel crystal structure have been successfully synthesized via both solvothermal and ultrasonic-assisted solvothermal methods. The powders contained submicron spheres which were consisted of nanoparticles with regular arrangement. The applied ultrasonic wave had significant effect on the shape and size of the spheres, particularly on their specific surface area, but it had no considerable effect on the magnetic properties. All the synthesized powders were superparamagnetic and their band gap energy was about 1.5 eV. High absorption rate is another unique characteristic of the powders so that it can complete the photocatalytic process in less than 10 min. The saturation magnetization of about 47 emu/g, together with negligible coercivity, make the synthesized nanostructured absorbent ideal for magnetic separation processes.
منابع مشابه
Synthesis of assembled copper nanoparticles from copper-chelating glycolipid nanotubes
Using glycolipid nanotubes as templates, assembled copper nanoparticles were prepared from copper-chelating amphiphiles by a simple annealing process. The morphology and structure of these nanoparticles were investigated using transmission electron microscopy and scanning electron microscopy. The experimental results showed that the nanoparticles are crystalline and mainly composed of face-cent...
متن کاملMicrowave assisted low temperature synthesis of MnZn ferrite nanoparticles
MnZnFe2O4 ferrite nanoparticles were prepared by co-precipitation method using a microwave heating system at temperature of 100 C. X-ray diffraction reveals the samples as prepared are pure ferrite nanocrystalline phase, transmission electron microscopy image analysis shows particles are in agglomeration state with an average size of about 10 nm, furthermore, crystal size of samples are increas...
متن کاملSolvothermal synthesis of silver nanoparticles from thiolates.
A new solvothermal method for the synthesis of thiol-protected silver nanoparticles starting from silver thiolates is reported. The method has been tried with thiols of different chain length, such as octane and octadecane thiols, and the particle size was found to be nearly the same for both molecules. The synthesis was dependent on heating conditions and the best results were obtained when th...
متن کاملSynthesis and characterization of Nickel Copper Ferrite
Nano size nickel copper ferrite powders (NiCuFe2O4) have been prepared by a prepared by Co precipitation method. The resulting powders were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM).The result showed nanosize nickel copper ferrite(35.65nm). The powders showed extensive XRD line broadening and sizes of crystals observed from the XRD line broadening was35.65 nm,...
متن کاملTunable synthesis of self-assembled cyclic peptide nanotubes and nanoparticles.
While tremendous efforts have been made in investigating scalable approaches for fabricating nanoparticles, less progress has been made in scalable synthesis of cyclic peptide nanoparticles and nanotubes, despite their great potential for broader biomedical applications. In this paper, tunable synthesis of self-assembled cyclic peptide nanotubes and nanoparticles using three different methods, ...
متن کاملSelf-assembled organic–inorganic magnetic hybrid adsorbent ferrite based on cyclodextrin nanoparticles
Organic-inorganic magnetic hybrid materials (MHMs) combine a nonmagnetic and a magnetic component by means of electrostatic interactions or covalent bonds, and notable features can be achieved. Herein, we describe an application of a self-assembled material based on ferrite associated with β-cyclodextrin (Fe-Ni/Zn/βCD) at the nanoscale level. This MHM and pure ferrite (Fe-Ni/Zn) were used as an...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 11 شماره 2
صفحات 130- 144
تاریخ انتشار 2020-04-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023