Ultimate Load Capacity and Behavior of Thin-Walled Curved-Steel Square Struts, Subjected to Compressive Load
نویسندگان
چکیده مقاله:
There have been some experimental tests on hollow curved-steel struts with thin-walled square sections, in order to investigate their general behavior, particularly their capacity for bearing differing loads. One set of square tubes are cold-formed into segments of circular arcs with curvature radii, equal to 4000 mm. Different lengths of curved struts are fabricated so as to cover a practical range of slenderness ratios. The struts tests were pin-ended and had slenderness ratios, based on the straight length between ends ranging from 31-126. The cold-forming operation induces initial inelastic behavior and associated residual stresses. There is, therefore, an interaction among material effects, such as the strain hardening capacity, the Bauschinger effect, strain aging, and residual stresses, together with the significant geometrical effect of the initial curvature, caused by the cold-forming operation. Eventually the results from three series of tests, which are taken on fully-aged and stress-relief-annealed square curved struts, are compared. The variations in load carrying response are discussed.
منابع مشابه
ultimate load capacity and behavior of thin-walled curved-steel square struts, subjected to compressive load
there have been some experimental tests on hollow curved-steel struts with thin-walled square sections, in order to investigate their general behavior, particularly their capacity for bearing differing loads. one set of square tubes are cold-formed into segments of circular arcs with curvature radii, equal to 4000 mm. different lengths of curved struts are fabricated so as to cover a practical ...
متن کاملparametric analysis of square thin walled section in energy absorption due to oblique load
in this study, first energy absorption of axial and bending loading is considered. next, thin walled structures under oblique loading are investigated using abaqus computer simulation, where 180 different cases are simulated. simulation results of the thin walled structures under oblique loading were compared with the experimental results of nagel, and good agreement was perceived. simulation r...
متن کاملultimate axial load and moment interaction diagrams for prestressed hpc thin-walled short columns
in order to lighten the prestressed concrete solid members, nowadays, it is possible to make use of the advantage of hpc (fc'>60 mpa) as well as replacing the solid section with a psc thin-walled section for certain members such as circular and box columns. using the strength theory of aci, a numerical procedure along with a computer program was developed for the analysis of such sections ...
متن کاملInelastic Behavior of Concrete-filled Thin-walled Steel Tubular Columns Subjected to Local Buckling
This paper is concerned with the inelastic behavior of axially loaded concrete-filled thin-walled steel tubular columns subjected to local buckling. A nonlinear fiber element analysis program accounting for local buckling effects is developed for predicting the ultimate strength and ductility of concrete-filled thin-walled steel tubular columns. The effects of local buckling are taken into cons...
متن کاملEffect of location and orientation of two short dents on ultimate compressive strength of a thin square steel plate
Thin plates are subject to several imperfections (including dents) which reduce the ultimate strength of plates. In this work, nearness effect of two short dents of same size on the ultimate strength of a thin square steel plate is numerically investigated. Dents are modeled on the FE surface of the undented plate by varying the location and orientation of dents and the centre distance between ...
متن کاملLoad Test and Model Calibration of a Horizontally Curved Steel Box-Girder Bridge
In this paper, full scale load test of a horizontally curved steel box-girder bridge is carried out in order to detect structural defects, which reportedly result in unwanted vibrations in nearby buildings. The bridge is tested under the passage of six heavy vehicles at different speeds, so as to determine its static and dynamic responses. A total number of one hundred and two (102) sensors are...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 49 شماره 1
صفحات 97- 109
تاریخ انتشار 2016-06-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023