Three Dimensional Laminar Convection Flow of Radiating Gas over a Backward Facing Step in a Duct

نویسندگان

چکیده مقاله:

In this study, three-dimensional simulations are presented for laminar forced convection flow of a radiating gas over a backward-facing step in rectangular duct. The fluid is treated as a gray, absorbing, emitting and scattering medium. The three-dimensional Cartesian coordinate system is used to solve the governing equations which are conservations of mass, momentum and energy. These equations are solved numerically using the CFD techniques to obtain the temperature and velocity fields. Discretized forms of these equations are obtained by the finite volume method and solved using the SIMPLE algorithm. Since the gas is considered as a radiating medium, all of the convection, conduction and radiation terms are presented in the energy equation. For computation of radiative term in energy equation, the radiative transfer equation (RTE) is solved numerically by the discrete ordinates method (DOM) to find the divergence of radiative heat flux distribution inside the radiating medium. The numerical results are presented graphically and the effects of the radiation-conduction parameter, optical thickness and albedo coefficient on heat transfer behavior of the system are investigated. Comparison of numerical results with the available data published in open literature shows a good consistency.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ivestigation of Entropy Generation in 3-D Laminar Forced Convection Flow over a Backward Facing Step with Bleeding

A numerical investigation of entropy generation in laminar forced convection of gas flow over a backward facing step in a horizontal duct under bleeding condition is presented. For calculation of entropy generation from the second law of thermodynamics in a forced convection flow, the velocity and temperature distributions are primary needed. For this purpose, the three-dimensional Cartesian co...

متن کامل

Three-dimensional instability in flow over a backward-facing step

Results are reported from a three-dimensional computational stability analysis of flow over a backward-facing step with an expansion ratio (outlet to inlet height) of 2 at Reynolds numbers between 450 and 1050. The analysis shows that the first absolute linear instability of the steady two-dimensional flow is a steady three-dimensional bifurcation at a critical Reynolds number of 748. The criti...

متن کامل

Three-dimensional convection flow adjacent to inclined backward-facing step

Simulations of three-dimensional laminar forced convection adjacent to inclined backward-facing step in rectangular duct are presented to examine effects of step inclination on flow and heat transfer distributions. The step height is maintained as constant while its inclination angle is changed from 15 to 90 . The inlet flow is hydrodynamically steady and fully developed with uniform temperatur...

متن کامل

Simulation of Steady, Laminar Flow Over a Backward-Facing Step

A 2D Navier-Stokes solver was developed to simulate steady,laminar flow over a backward-facing step of height h. The step expansion ratio=1/2 and the flow at the step was assumed to be fully developed, laminar channel flow. The Reynolds number for this flow was defined as Re=Uh/ν. The 2D incompressible Navier-Stokes equations was solved in generalized curvilinear coordinates using artificial co...

متن کامل

effects of baffle on separated convection step flow of radiating gas in a duct

in this paper, the effects of baffle on thermal characteristics of combined convection-radiation heat transfer in laminar flow adjacent to an inclined backward facing step (bfs) in a horizontal duct are investigated. a baffle is mounted on the top wall of channel downstream side of step. in this study, the fluid is treated as a gray, absorbing, emitting and scattering medium; therefore, in the ...

متن کامل

Reverse flow regions in three-dimensional backward-facing step flow

Laser-Doppler velocity measurements adjacent to the bounding walls of three-dimensional (3-D) backward-facing step flow are performed for the purpose of mapping the boundaries of the reverse flow regions that develop in this geometry (adjacent to the sidewalls, the flat wall and the stepped wall) as a function of the Reynolds number. The backward-facing step geometry is configured by a step hei...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 25  شماره 4

صفحات  399- 410

تاریخ انتشار 2012-10-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023