Synthesis of calcium carbide-derived carbon by mechanochemical reaction of calcium carbide with sulfur, iron sulfide and zinc oxide

نویسندگان

چکیده مقاله:

In the present work, we report a novel design and preparation for the mechanochemical synthesis of calcium carbide-derived carbon (CaC2-CDC) at ambient temperature. Thermodynamic calculations confirmed the possibility of calcium carbide-derived carbon formation by the reaction of calcium carbide with sulfur, iron sulfide and zinc oxide at ambient temperature. The CDCs were synthesized by the ball-milling of calcium carbide and reactants with stoichiometric ratio, and explore the effect of milling time on CDC formation for 1, 3, 5, 7 and 10 hours for the reaction of calcium carbide and sulfur. Then, the as-synthesized powders were dissolved in 5% hydrochloric acid to remove by-products, and the CDCs was obtained by repeated washing with distilled water and filtration. The as-prepared CDCs and raw materials were characterized by X-ray diffraction (XRD), Raman spectroscopy, FTIR and SEM. The XRD patterns reveals merely the reaction between calcium carbide and sulfur at 10 h. SEM images proved the formation of the numerous nanometer porosities. According to Raman results, CDCs had high graphitization degree, and also FTIR results confirmed the formation of carbon bonds. Moreover, CDCs obtained by the reaction with sulfur had the highest graphitization degree and lowest disorder.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Examination of Sulfur Dioxide Dry Removal from a Mixture of Gases by Calcium Oxide, Calcium Carbonate and Dolomite

This paper refers to an experiment of SO2 absorption to the three different sorbents: calcium-oxide (CaO), calcium-carbonate (CaCO3) and dolomite (CaMg(CO3)2). In the reactor under the condition of oxidation atmosphere with the mass of sorbent (sample) of 100 g with fractional composition of 500-700µm, the gas temperatur...

متن کامل

Synthesis and study of co-doped zinc oxide nanoparticles with copper, magnesium, calcium, and cobalt ions by microemulsion method

In the present study, zinc oxide nanoparticles were synthesized by simultaneous doping of Zn0.98Cu0.02O with Ca2+, Mg2+, and Co2+ ions using the microemulsion method. The phase, crystallization, and particle size of samples were identified by X-ray diffraction (XRD) analysis. The formation of the desired phase was confirmed by, X-ray diffraction. Also, the infrared spectrum (Far-FTIR) was confi...

متن کامل

Encapsulation of Iron Carbide in Carbon Nanocapsules

Whiskers of iron carbide encased in carbon shells have been prepared from iron(I1) phthalocyanine. Solid FePc is oxygenated and then thermally treated under H2 flow. With proper control of conditions, Fe3C free from metallic iron can be synthesized. The product was characterized with the help of Mossbauer effect spectroscopy, X-ray diffraction, X-ray absorption, and transmission electron micros...

متن کامل

Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method

In this study, mechanochemcical process(MCP) is applied to synthesize ultrafine TaC powders. In this research, nano powder composite TaC-TaB2 was produced using mixtures of tantalum carbide and boron carbide as raw materials via mechanochemical process. The phase formation characterization during process was utilized by X-ray diffractometry (XRD). The morphology of synthesized powder was studie...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 11  شماره 1

صفحات  106- 119

تاریخ انتشار 2022-05

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

کلمات کلیدی برای این مقاله ارائه نشده است

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023