Scanning hall probe microscopy technique for investigation of magnetic properties

نویسندگان

  • A. Mehdizadeh Catalysis and nanotechnology research division, research institute of petroleum industry, P. O. Box: 1485733111, Tehran, Iran.
  • M. Ghalbi Ahangari Science and Chemical technology research division, research institute of petroleum industry, P. O. Box: 1485733111, Tehran, Iran.
  • S. Kiani Catalysis and nanotechnology research division, research institute of petroleum industry, P. O. Box: 1485733111, Tehran, Iran.
  • S. Sadegh Hassani Catalysis and nanotechnology research division, research institute of petroleum industry, P. O. Box: 1485733111, Tehran, Iran.
  • Z. Sobat Catalysis and nanotechnology research division, research institute of petroleum industry, P. O. Box: 1485733111, Tehran, Iran.
چکیده مقاله:

Scanning Hall Probe Microscopy (SHPM) is a scanning probe microscopy technique developed to observe and image magnetic fields locally. This method is based on application of the Hall Effect, supplied by a micro hall probe attached to the end of cantilever as a sensor.  SHPM provides direct quantitative information on the magnetic state of a material and can also image magnetic induction under applied fields up to ~1 tesla. This method is non-invasive with high spatial resolution and sensitivity. Furthermore, this microscopy technique can be operated in a wide range of temperatures while the magnetic field caused by hall probe is so minimal, which has negligible effect on the measuring process. Meanwhile, the sample does not need to be an electrical conductor, unless using Scanning Tunneling Microscope (STM) for height control. SHPM measurements can be performed in ultra-high vacuum (UHV) and are non-destructive for crystal lattice and complicated structures.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

scanning hall probe microscopy technique for investigation of magnetic properties

scanning hall probe microscopy (shpm) is a scanning probe microscopy technique developed to observe and image magnetic fields locally. this method is based on application of the hall effect, supplied by a micro hall probe attached to the end of cantilever as a sensor.  shpm provides direct quantitative information on the magnetic state of a material and can also image magnetic induction under a...

متن کامل

Scanning probe recognition microscopy investigation of tissue scaffold properties

Scanning probe recognition microscopy is a new scanning probe microscopy technique which enables selective scanning along individual nanofibers within a tissue scaffold. Statistically significant data for multiple properties can be collected by repetitively fine-scanning an identical region of interest. The results of a scanning probe recognition microscopy investigation of the surface roughnes...

متن کامل

Biological Investigation Using Scanning Probe Recognition Microscopy

Direct investigation of, and interaction with, biological objects at the macromolecular level will provide insight into multiple physical regulatory processes. Scanning probe microscopy (SPM) techniques have the potential to provide a direct interaction with living specimens at the macromolecular scale. In the present research we will discuss the site-specific recognition techniques that are ap...

متن کامل

Bismuth Micro and Nano Hall Sensors on Photo-plastic Cantilevers for Scanning Hall Probe Microscopy

Conventional Hall devices are widely employed to measure magnetic fields produced by millimetre sized (or larger) current-caring conductors or permanent magnets with a standard active area of about (100 μm). Micro-Hall sensors have recently emerged as a powerful and sensitive tool for the investigation of local magnetic field properties of the micro and nanostructures. The conventional Hall eff...

متن کامل

Scanning Probe Microscopy Investigation of Metal Oxides Nanocrystalline

Scanning probe microscopy techniques (SPM) have been applied to a rapidly improvement in the characterization of metal oxide nanocrystalline. These materials are widely used in photon-to-electricity conversion devices, such as dye-sensitized solar cells. The surface properties of such nanocrystalline determine the devices’ performance. SPM imaging of nanocrystal surfaces and nanoscale systems h...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 4

صفحات  329- 337

تاریخ انتشار 2015-10-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023