Removal of Direct Red 81 from Aqueous Solution Using an Acidic Soil Containing Iron (Case Study of Lahijan Soil)
نویسندگان
چکیده مقاله:
Direct Red 81, a dye widely used in textile industries, is frequently detected dye in water resources. High costs, the formation of hazardous byproducts, and high energy costs restrict the use of some removal methods. Therefore, the main objectives of this research are the feasibility of using soil containing iron as a low cost adsorbent to remove (Direct Red 81) from aqueous phase and determining the optimum conditions for maximum removal efficiency. The present study was conducted at a bench scale. The influence of different parameters including the number of adsorbents; initial concentration of dye solution and pH at different time intervals on dye removal efficiency were investigated. The maximum removal rate of dye (84%) occurred in pH=7 in the presence of 1 g soil with the initial dye concentration of 50 mg/L at 30 min reaction time. Moreover, due to the effect of acidic pH and the iron content of used soil a significant increase was observed in the rate of Direct Red 81dye removal. In conclusion, using soil containing iron is an appropriate method for the removal of Direct Red 81 from aqueous solutions.
منابع مشابه
Removal of Acid Red 18 dye from Aqueous Solutions Using Nanoscale Zero-Valent Iron
Background and Purpose:Organic dyes with a complex structure are often toxic, carcinogenic, mutagenic, non-biodegradation and stable in the environment and if released to the environment without treatment can endanger the environment and human health. The aim was to evaluate the performance nanoscalezero-valent iron (NZVI) in the removal of dye acid red 18 (AR18) from aqueous solutions. Materia...
متن کاملRemoval of Arsenate from Aqueous Solution Using Nanoscale Iron Particles
Removal of As(V) using nanoscale iron particles was examined in batch reactors. Nanoscale iron particles, utilizing zerovalent iron with a diameter less than 100 nm as reactive materials, have been demonstrated to effectively remediate a wide variety of common environmental contaminants. In this study, characterization of nanoscale iron particles and their corrosion products was conducted using...
متن کاملSynthesis of Magnetic Iron-Oxide Nanofiber Composite using Electrospinning: An Absorbent for Removal of Nitrate from Aqueous Solution
This project is aimed at preparation of nano filters using recycled foam of food containersenriched by magnetic nanoparticles, for nitrate removal from water. The characterization ofthis electrospun magnetic nanofiber depicted a high capacity for nitrate adsorption. TheScanning Electron Microscopy (SEM), X-Ray powder Diffraction (XRD), Energy DispersiveSpectrometry (EDAX) and Inductively Couple...
متن کاملRemoval of Congo red from aqueous solutions using nano-Chitosan
It is now recognized that adsorption using low-cost adsorbents is an effective and economic method for water decontamination. Chitosan is derived by deacetylation of the naturally occurring biopolymer chitin which is the second most abundant polysaccharide in the world after cellulose. In this study, the capacity of the chitosan nanoparticles was studied for the removal of the anionic Congo red...
متن کاملRemoval of p-chlorophenol from aqueous solution using ultraviolet/zerovalent-iron (UV/ZVI)/persulfate process
In this study, degradation of p-chlorophenol (p-CP) was evaluated using persulfate (PS) activated zerovalent iron (ZVI) based ultraviolet (UV) in a bench scale photoreactor. The effect of operational parameters such as solution pH (3, 7, and 11), reaction time (0-60 minutes), ZVI dosage (0.15, 1.25, 0.5, 1, and 1.5 mM), PS concentration (0.5, 1.5, 2, 2.5, 3, and 4 mM), and initial p-CP concentr...
متن کاملRemoval of Fe2+ from Aqueous Solution Using Manganese Oxide Coated Zeolite and Iron Oxide Coated Zeolite
The adsorption of Fe2+ by the manganese oxide coated zeolite (MOCZ) and iron oxide coated zeolite (FOCZ) was studied. Surface properties of adsorbents have been investigated for monitoring their changes and morphology for both of the MOCZ and FOCZ. Main variables namely; contact time, pH, initial concentration of Fe2+, size and dosage of adsorbent have been optimized, and the results contrasted...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 38 شماره 2
صفحات 107- 112
تاریخ انتشار 2019-04-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023