Preparation and evaluation of carvacrol pellets based on PVP solid-dispersion by extrusion-spheronization technique
نویسندگان
چکیده مقاله:
Background and objectives: Carvacrol is one of the main pharmacologically active components of Thymus vulgaris essential oil which has shown several therapeutic effects. There are few works regarding the formulation of essential oils as oral solid dosage forms due to their liquid nature, stability and technical problems. The aim of this study was to combine the solid-dispersion approach and extrusion-spheronization technique to produce pellets with desirable physico-mechanical and release properties. Methods: Solid dispersion matrix (30%) of carvacrol in polyvinylpyrrolidone K30 was prepared by solvent evaporation. The matrix was mixed with Avicel and lactose and granulated by water. The wet mass was transformed into pellets by extrusion-spheronization. In order to compare the solid dispersion method with the classic approaches, another pellet formulation was prepared by absorption of carvacrol on Aerosil. The pellets were characterized for size (sieve analysis), shape factors (image analysis), mechanical strength, carvacrol content, and release rate (dissolution test). Accelerated stability test of formulations was also carried out. Results: Using suitable composition of solid dispersion matrix and granulation fluid, the pellets with desirable size and shape and mechanical properties could be produced. PVP-based pellets had higher mechanical strength, slower release rate and improved content and stability. The PVP ratio showed considerable effect on release properties of the pellets. Conclusion: Overall, the results revealed the feasibility of preparing desirable pellets containing carvacrol with acceptable content, stability and release properties which can be administered as hard gelatin capsules.
منابع مشابه
Preparation and evaluation of pellets using acacia and tragacanth by extrusion-spheronization
BACKGROUND AND THE PURPOSE OF THE STUDY Extrusion-spheronization is an established technique for the production of pellets for pharmaceutical applications. In this study, the feasibility and influence of the incorporation of acacia, by itself and in combination with tragacanth, on the ability of formulations containing 2 model of drugs (ibuprofen and theophylline) to form spherical pellets by e...
متن کاملDevelopment and evaluation of omeprazole pellets fabricated by sieving-spheronization and extrusion - spheronization process.
Pelletized dosage forms can be prepared by different methods which, in general, are time consuming and labor intensive. The current study was carried out to investigate the feasibility of preparing the spherical pellets of omeprazole by sieving-spheronization. An optimized formulation was also prepared by extrusion-spheronization process to compare the physical parameters between these two meth...
متن کاملOptimization of Pellets Containing Solid Dispersion Prepared by Extrusion/Spheronization Using Central Composite Design and Desirability Function
Furosemide is a class IV biopharmaceutical classification system drug having poor water solubility and low bioavailability due to the hepatic first-pass metabolism and has a short half-life of 2 h. To overcome the above drawback, this study was carried to prepare and evaluate the pellets containing furosemide solid dispersion (SD) for oral administration prepared by extrusion/spheronization. SD...
متن کاملEvaluation of ethylcellulose and its pseudolatex (Surelease) in preparation of matrix pellets of theophylline using extrusion-spheronization
Objective(s): This study evaluates the effect of substitution of microcrystalline cellulose (MCC) with ethylcellulose (EC) on mechanical and release characteristics of theophylline pellets. Materials and Methods: The effect of addition of EC was investigated on characteristics of pellets with varying drug content prepared by extrusion-spheronization. Also the effect of type of granulating liqui...
متن کاملEvaluation of ethylcellulose and its pseudolatex (Surelease) in preparation of matrix pellets of theophylline using extrusion-spheronization
OBJECTIVES This study evaluates the effect of substitution of microcrystalline cellulose (MCC) with ethylcellulose (EC) on mechanical and release characteristics of theophylline pellets. MATERIALS AND METHODS The effect of addition of EC was investigated on characteristics of pellets with varying drug content prepared by extrusion-spheronization. Also the effect of type of granulating liquid ...
متن کاملFormulation and Evaluation of Aceclofenac Loaded Sr Matrix Pellets: Extrusion Spheronization
Objective: The major objective of this study was to prepare and evaluate OnceDaily Sustained Release Matrix Pellets Formulation of Aceclofenac by using Extrusion-Spheronization technique. Methods: The sustained release matrix pellets of Aceclofenac were prepared by industrially applied extrusion spheronization technique. The different formulations were prepared using HPMC K100M LVCR as hydrophi...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 4 شماره Supplement
صفحات 41- 41
تاریخ انتشار 2017-11-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023