Preparation and Characterization of Poly-(methyl ethyl cyanoacrylate) Particles Containing 5-Aminosalicylic acid
نویسندگان
چکیده مقاله:
Poly-(alkylcyanoacrylate) ester particles have been used for the preparation of different formulations ranging from ophthalmic delivery systems to cancer chemotherapy carriers in clinic. The aim of this study was to prepare and characterize poly-(methyl ethyl cyanoacrylate) (PMECA) particles containing 5-aminosalicylic acid (5-ASA). PMECA particles were prepared using the inverse emulsification polymerization technique. The effects of various formulation parameters such as dispersed phase volume, polymer to drug weight ratio, and surfactant concentration on loading efficiency and size of the prepared particles were investigated. The amount of drug was determined by UV spectrophotometery at 331 nm. Morphological characteristics of particles and particle size analysis were studied by Scanning Electron Microscopy (SEM) and Laser Light Scattering techniques, respectively. The results showed that there was no linear relationship between the dispersed phase volume (DPV) and loading efficiency of 5-ASA in the range of 20-50%. Increasing polymer/drug weight ratio in the range of 1-15, enhanced the loading efficiency from 11.4 to 78.2% in a linear mode (r=0.987). Increasing the surfactant concentration in the range of 1-3% did not increase the loading efficiency of the prepared particles, and increasing the concentration to 5% even decreased the loading efficiency of particles. Laser light scattering and SEM evaluations showed that in all prepared formulations, particles were in a mixture of micro and nanospheres and micro and nanocapsules and 50 percent of particles had mean sizes in the range of 6.4-10.1 micrometer. Although our results showed significant differences in the mean particle size between some of the prepared formulations, this variation was not practically important. It was concluded that by using proper conditions, it is possible to use PMECA as a polymeric matrix for loading of 5-ASA and the other hydrophilic drugs.
منابع مشابه
preparation and characterization of poly-(methyl ethyl cyanoacrylate) particles containing 5-aminosalicylic acid
poly-(alkylcyanoacrylate) ester particles have been used for the preparation of different formulations ranging from ophthalmic delivery systems to cancer chemotherapy carriers in clinic. the aim of this study was to prepare and characterize poly-(methyl ethyl cyanoacrylate) (pmeca) particles containing 5-aminosalicylic acid (5-asa). pmeca particles were prepared using the inverse emulsification...
متن کاملPreparation and Characterization of Poly(D,L-Lactide-co-Glycolide) Nanoparticles Containing Ascorbic Acid
This paper is covering new, simplistic method of obtaining the system for controlled delivery of the ascorbic acid. Copolymer poly (D,L-lactide-co-glycolide) (DLPLG) nanoparticles are produced using physical method with solvent/nonsolvent systems where obtained solutions were centrifuged. The encapsulation of the ascorbic acid in the polymer matrix is performed by homogenization of water and or...
متن کاملsynthesis and characterization of some new cyclometalated organoplatinum(ii) complexes containing phosphite ligand
در این تحقیق روشی جهت سنتز یک سری از کمپلکس های پلاتین (ii) حاوی لیگاند های دهنده ی فسفری شامل فسفیت و فسفین ارائه شده است. واکنش پیش ماده ی پلاتین (ii)،trans/cis- [ptcl2(sme2)2] ، با 2 اکی مولار از لیگاند p(oph)3در حلال بنزن کمپلکس1، cis-[ptcl2(p(oph)3)2] را تولید می نماید. جهت سنتز کمپلکس سایکلو متال فسفیتی، کمپلکس 1 با 1 اکی والان واکنشگر ptcl2 در حلال زایلن در شرایط رفلاکس زیر گاز آرگون م...
Electrochemical Synthesis of 5-Aminosalicylic Acid from 5- Nitrosalicylic Acid in Alkaline Media
5-Aminosalicylic acid (5-ASA) is currently prepared by electrochemical reduction of 5-nitrosalicylic acid (5-NSA) in acidic media. In this work, electrolytic reduction of 5-NSA in alkaline media is presented. Reactionconditions and parameters such as anode and cathode electrodes, electrolyte type, reaction time, temperature,current, and the pH for isolation of product are investigated. The yiel...
متن کاملPreparation and Characterization of Poly (methyl Methacrylate) (pmma) and Poly (vinyl Chloride) (pvc) Alloys
Alloys of Poly (Methyl methacrylate) (PMMA) and Poly (vinyl Chloride) (PVC) were prepared by solvent casting techniques. Physiochemical characteristics of the products were studied. It was found that at certain relative concentration, some of these properties were enhanced, while in some, degraded relative to the constituent homopolymers. These results were interpreted in terms of the interacti...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره Volume 4 شماره Number 1
صفحات 21- 27
تاریخ انتشار 2010-11-20
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023