Physical modeling of a refractive index photonic crystal fiber based on surface plasmon resonance
نویسنده
چکیده مقاله:
این مقاله چکیده ندارد
منابع مشابه
Fiber Optic Surface Plasmon Resonance based Refractive Index Sensor
In the present study, a surface plasmon resonance (SPR) based fiber optic sensor is proposed. The extreme sensitivity of SPR modes on the surrounding refractive index has been exploited to make the sensor. The optical fiber is coated with gold film which supports the propagation of surface plasmons. The SPR dip in the transmission spectrum is observed and its shift with varying refractive indic...
متن کاملA surface-plasmon-resonance sensor based on photonic-crystal-fiber with large size microfluidic channels
A surface-plasmon-resonance (SPR) sensor based on photonic-crystal-fiber (PCF) with large size microfluidic channels is proposed. The size of the microfluidic channels with gold coating can be enlarged by reducing the number of the holes in the second layer, so the structure of the PCF is simple and easy to manufacture. It is propitious for metal coating and infiltration of microfluidic. The co...
متن کاملSurface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber.
The refractive index sensing characteristics of the side-polished photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor are detailed investigated in this paper. We used the finite element method (FEM) to study the influences of the side-polished depth, air hole size, lattice constant, and the refractive index (RI) of the PCF material on sensing performance. The simulation results ...
متن کاملSurface plasmon resonance sensor based on photonic crystal fiber filled with silver nanowires
Silver nanowire filled photonic crystal fibers are proposed in this paper to achieve surface plasmon resonance sensors and overcome the complicacy and difficulty of coating the holes in the photonic crystal fiber. Optical field distributions of these fibers at different wavelengths are calculated and simulated using the finite element method (FEM), and the sensing properties are discussed in bo...
متن کاملA selectively coated photonic crystal fiber based surface plasmon resonance sensor
We propose a novel design for a photonic crystal fiber based surface plasmonic resonance sensor. The sensor consists of selectively metal-coated air holes containing analyte channels, which enhance the phase matching between the plasmonic mode and the core-guided mode. Good refractive index sensitivity as high as 5500 nm/RIU (refractive index unit) can be achieved in the proposed structure. Com...
متن کاملPhotonic Crystal Fiber Mach-Zehnder Interferometer for Refractive Index Sensing
We report on a refractive index sensor using a photonic crystal fiber (PCF) interferometer which was realized by fusion splicing a short section of PCF (Blaze Photonics, LMA-10) between two standard single mode fibers. The fully collapsed air holes of the PCF at the spice regions allow the coupling of PCF core and cladding modes that makes a Mach-Zehnder interferometer. The transmission spectru...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 19 شماره 3
صفحات 27- 33
تاریخ انتشار 2023-03
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی برای این مقاله ارائه نشده است
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023