Numerical investigation the effect of accumulator on reducing the ‎pressure waves in a common rail fuel injection system of diesel engine

Pressure fluctuations during fuel injection are one of the factors that negative effect on performance of diesel engine. These fluctuations are caused by the rapid opening and closing of the nozzles and the creation of pressure waves in the fuel rail. One way to control these pressure fluctuations is to change the injector design and use an accumulator in the injector. This study is performed to investigate the effect of adding accumulator on the injector to control pressure waves in the common rail fuel injection system of diesel engines. As the simulation results show, at injection pressure of 1000 bar and energizing time of 0.8 milliseconds, in the case of no accumulator, the maximum pressure fluctuation in the fuel rail is 1046 bar and the minimum pressure is 891 bar. By adding an accumulator with a volume of 4 cm3, the maximum pressure continued to decrease and reached 1023 bar, and the minimum pressure of the fuel rail increased by 17 bar, 943 bar. These changes are also noticeable in other pressures and energizing times, so the best accumulator that has the most impact on reducing pressure fluctuations is the accumulator with a volume of 4 cm3.