Nano-structure TiO2 film coating on 316L stainless steel via sol-gel technique for blood compatibility improvement

نویسندگان

  • Mohammadreza Foruzanmehr Department of Materials Science and Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran
  • Shamsoddin Mirdamadi Tehrani Department of Materials Science and Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran
چکیده مقاله:

Objective(s):  Titanium oxides are known to be appropriate hemocompatible materials which are suggested as coatings for blood-contacting devices. Little is known about the influence of nanometric crystal structure, layer thickness, and semiconducting characteristics of TiO2 on blood hemostasis.   Materials and Methods: Having used sol-gel dip coating method in this study, TiO2 thin films were deposited on nano-scale electro-polished stainless steel 316L with 1 to 5 nano-sized layers. Surface morphology and structure of the film were studied with X-ray diffraction and atomic force microscopy. Blood compatibility was also determined by measuring the platelet activation (CD62P expression), platelet adhesion (Scanning Electron Microscopy), and the blood clotting time on these samples.   Results: The films were compact and smooth and existed mainly in the form of anatase. By increasing the number of TiO2 thin layer, clotting time greatly extended, and the population of activated platelet and P-selectine expression changed according to the surface characteristics of each layer.   Conclusion: The findings revealed that stainless steel 316L coated with nano-structured TiO2 layer improved blood compatibility, in terms of both blood platelet activity and coagulation cascade, which can decrease the thrombogenicity of blood contacting devices which were made from stainless steel.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

nano-structure tio2 film coating on 316l stainless steel via sol-gel technique for blood compatibility improvement

objective(s):  titanium oxides are known to be appropriate hemocompatible materials which are suggested as coatings for blood-contacting devices. little is known about the influence of nanometric crystal structure, layer thickness, and semiconducting characteristics of tio2 on blood hemostasis.   materials and methods: having used sol-gel dip coating method in this study, tio2 thin films were d...

متن کامل

Infrared Spectroscopy of Titania Sol-Gel Coatings on 316L Stainless Steel

Sol-gel titania films were deposited on 316L stainless steel using titanium isopropoxide as a chemical precursor. Dipcoating was performed at withdrawal speeds of 6 mm/min, 30 mm/min, and 60 mm/min. Deposited gel films were heat treated in air at 80 ̊C, 100 ̊C, 300 ̊C, and 400 ̊C. The structural evolution of the coatings was evaluated by infrared reflection-absorption spectroscopy. The influence of...

متن کامل

Alumina nanostructured coating for corrosion protection of 316L stainless steel

Nanostructured alumina thin films were coated on stainless steel by Sol-Gel dip coating method. In order to prevent crack formation, Al2O3 films were kept in a solvent bath immediately after coating to reduce the rate of drying. Effects of calcination temperature and withdrawal speed on structural properties were analyzed using XRD and SEM. Topography and thickness of coat...

متن کامل

Organic-inorganic sol-gel coating for corrosion protection of stainless steel

One of the most effective corrosion control techniques is the electrical isolation of the anode from the cathode [1, 2]. The chromium oxide (Cr2O3) passivation layer formed on the surface of stainless steel in oxidizing environments is one example. This is the main reason for the durability and corrosion resistance behavior of this particular metal [2, 3]. A more generic approach to enhance cor...

متن کامل

Alumina nanostructured coating for corrosion protection of 316L stainless steel

Nanostructured alumina thin films were coated on stainless steel by Sol-Gel dip coating method. In order to prevent crack formation, Al2O3 films were kept in a solvent bath immediately after coating to reduce the rate of drying. Effects of calcination temperature and withdrawal speed on structural properties were analyzed using XRD and SEM. Topography and thickness of coat...

متن کامل

Formation of Surface Nano/Ultrafine Structure using Deep Rolling Process on the AISI 316L Stainless Steel

Austenitic stainless steels (ASSs) have an excellent corrosion resistance but relatively-low hardness and yield strength [1,2], leading to limited usage in applications that high values of hardness and wear resistance is necessary for material surface. Therefore, surface properties such as hardness must be improved using appropriate techniques. Mechanical surface treatments such as ultrasonic s...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 1  شماره 3

صفحات  128- 136

تاریخ انتشار 2014-04-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023