Mathematical Modeling of Column-Base Connections under Monotonic Loading

mathematical modeling of column-base connections under monotonic loading

some considerable damage to steel structures during the hyogo-ken nanbu earthquake occurred. among them, many exposed-type column bases failed in several consistent patterns, such as brittle base plate fracture, excessive bolt elongation, unexpected early bolt failure, and inferior construction work, etc. the lessons from these phenomena led to the need for improved understanding of column base...

Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE)

In this study, the behavior characteristics of I beam-to-concrete filled tube (CFT) column connection is studied through experiment and finite element models under the monotonic loading. To validate the finite element modeling, at first, an experimental model is made and experimented. After validation of the finite element modeling, different models were created in the software. The studied par...

Hybrid Mathematical-Informational Modeling of Beam-to-Column Connections

performance of exterior precast concrete beam-column dowel connections under cyclic loading

the present study focuses on the performance of precast concrete beam-column dowel connections subjected to cyclic loading by conducting experiments. in this study, one-third scale model of two types of precast and a monolithic beam-column connection were cast and tested under reverse cyclic loading. the precast connections considered for this study is a beam-column connection where beam is con...

Influence of Sudden Column Loss on Dynamic Response of Steel Moment Frames under Blast Loading

Modeling buildings response to blast and subsequent progressive collapse interested more and more researchers during the past two decades. Due to the threat from extreme loading, efforts have been made to develop methods of structural analysis and design. In this paper, progressive collapse capacity of steel moment frames was first investigated using alternate load path method, then a nonlinear...

Modeling of human calvarium under static loading

There are many papers on head modeling in literature [1]. Generally, the topic of most of them is designing and modeling devices for head (especially brain) protection, e.g. helmets. On the other side, most papers are about modeling of whole part of top body (a torso and a head). The main aim of these researches is simulation of the backbone behavior under external load applied to the head. The...