Influences of Device Architectures on Characteristics of Organic Light-Emitting Devices Incorporating Ambipolar Blue-Emitting Ter(9,9-diarylfluorenes)
نویسندگان
چکیده مقاله:
In this article, we report the studies of various device architectures of organic lightemitting devices (OLEDs) incorporating highly efficient blue-emitting and ambipolar carriertransport ter(9,9-diarylfluorene)s, and their influences on device characteristics. The device structures investigated include single-layer devices and multilayer heterostructure devices employing the terfluorene as one functional layer. It is found that, although these terfluorenes are capable of bipolar carrier transport, rather poor device performance of single-layer devices in comparison with multilayer devices indicates that the heterostructure is still essential for balancing hole/electron injection and currents, for achieving high emission efficiencies, and for full utilization of high luminescence efficiency of these terfluorenes. With the heterostructure of hole-transport layer/terfluorene/electrontransport layer and careful choice of carriertransport materials, effective hole and electron injection, confinement of carriers, and confinement of excitons in terfluorenes are achieved. As a consequence, a highly efficient (4.1% quantum efficiency), low-voltage (~2.5 V turn-on voltage), and color-saturated nondoped blue-emitting device is demonstrated. Such high electroluminescent efficiency is consistent with high photoluminescent quantum yields of these terfluorenes and is competitive with those of efficient doped blue OLEDs.
منابع مشابه
Phosphorescent organic light-emitting device with an ambipolar oxadiazole host
In this latter, the authors demonstrated a phosphorescent organic light-emitting device OLED with a lower driving voltage and a longer operation lifetime based on 2,2 -bis 5-phenyl-21,3,4 oxadazolyl biphenyl, an oxadiazole OXD derivative, as the host of the emitting layer doped with a common green-emitting phosphorescent dopant, fac-tris 2-phenylpyridine iridium Ir ppy 3 . Rather than an electr...
متن کاملStudies on Novel Blue Phosphorescent Organic Light-emitting Devices
Organic light-emitting devices (OLEDs) have attracted lots of attentions and have been subjects of intensive studies due to their great potential for plat panel display and solid state illumination applications. In this paper, we designed a new type of ultra-thin non doped organic blue electrophosphorescent devices of based on Firpic. We also studied that the impact of object layer thickness fo...
متن کاملDriving voltage reduction in white organic light-emitting devices from selectively doping in ambipolar blue-emitting layer
White organic light-emitting devices OLEDs consisting of ambipolar 9,10-bis 2 -naphthyl anthracene ADN as a host of blue-emitting layer EML were investigated. A thin codoped layer of yellow 5,6,11,12-Tetraphenylnaphthacene rubrene served as a probe for detecting the position of maximum recombination rate in the 4 ,4 -bis 24N ,N-diphenylamino phenyl vinyl biphenyl DPAVBi doped-ADN EML. Due to th...
متن کاملEliminate the angular dependence of blue emission top-emitting organic light-emitting devices by integrating gratings
We demonstrate that the angular-dependence effect in blue emission top-emitting organic light-emitting diodes (TOLEDs) can be resolved in a very simple and effective way via introducing gratings and filling process. In this method, the shift of the peak emission wavelength with the viewing angle is successfully
متن کاملFabrication of blue top - emitting organic light - emitting devices with highly saturated color q
Blue top-emitting organic light-emitting devices (TOLEDs) with highly saturated color were developed by microcavity effect. The device structure studied was glass/reflective silver/indium-tin oxide (ITO)/organic electroluminescent stack/semi-transparent cathode (calcium/silver). By changing the thicknesses of ITO and organic layers in the microcavity structure device doped with p-bis(p-N, Ndi-p...
متن کاملIntegrated three-color organic light-emitting devices
We report a demonstration of the integration of individual polymer-based light emitting devices of three different colors on the same substrate. Orange, green, and blue color devices are sequentially fabricated on the same indium–tin oxide ~ITO! coated glass substrate coated with a patterned insulator on the ITO, by the spin coating of polymer thin films, the vacuum deposition of top metal cont...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 2 شماره None
صفحات 45- 58
تاریخ انتشار 2008-02
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023