Finite element comparison of single, bi-layered and three-layered tube hydroforming processes
نویسندگان
چکیده مقاله:
In this paper, single, bi-layered and three-layered tube hydroforming processes were numerically simulated using the finite element method. It was found that the final bulges heights resulted from the models were in good agreement with the experimental results. Three types of modeling were kept with the same geometry, tube material and process parameters to be compared between the obtained hydroformed products (branch height, thickness reduction and wrinkling) using different loading path types. The results were also discussed.
منابع مشابه
finite element comparison of single, bi-layered and three-layered tube hydroforming processes
in this paper, single, bi-layered and three-layered tube hydroforming processes were numerically simulated using the finite element method. it was found that the final bulges heights resulted from the models were in good agreement with the experimental results. three types of modeling were kept with the same geometry, tube material and process parameters to be compared between the obtained hydr...
متن کاملA numerical study of the effect of geometrical factors on bi-layered tube hydroforming
Tube hydroforming is one type of unconventional metal forming process in which high fluid pressure and axial feed are used to deform a tube blank in the desired shape. Bi-layered tube hydroforming is suitable to produce bi-layered joints which can be used in special applications such as aerospace, oil production, and nuclear power plants. In this work a finite element study was performed using ...
متن کاملComputer Aided Design of the Tube Hydroforming and Dual Hydroforming Processes
This paper presents a control model of the hydroforming and the dual hydroforming process of a tube. The theoretical part includes calculations to measure the change in tube thickness through the developed process. The hydroforming and the dual hydroforming processes are simulated in the SOLIDSIMULATION software and the static and the dynamic simulations are modeled. The obtained results for th...
متن کاملInvestigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method
In ultrasonic tube hydroforming, the tube is hydro formed while the ultrasonic vibration is applied to the die. Prior studies provide experimental proof that ultrasonic tube hydroforming reduces corner radius, improves lubrication and uniform thickness. Use of ultrasonic vibration can decrease friction at the tube-die interface. Few attempts have been made to analyze the wire drawing while the ...
متن کاملComputer Aided Design of the Tube Hydroforming and Dual Hydroforming Processes
This paper presents a control model of the hydroforming and the dual hydroforming process of a tube. The theoretical part includes calculations to measure the change in tube thickness through the developed process. The hydroforming and the dual hydroforming processes are simulated in the SOLIDSIMULATION software and the static and the dynamic simulations are modeled. The obtained results for th...
متن کاملAxisymmetric Scaled Boundary Finite Element Formulation for Wave Propagation in Unbounded Layered Media
Wave propagation in unbounded layered media with a new formulation of Axisymmetric Scaled Boundary Finite Element Method (AXI-SBFEM) is derived. Dividing the general three-dimensional unbounded domain into a number of independent two-dimensional ones, the problem could be solved by a significant reduction in required storage and computational time. The equations of the corresponding Axisymmetri...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 2 شماره 2
صفحات 69- 80
تاریخ انتشار 2013-03-03
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023