Evaluation of Shear Bond Strength between Amalgam and Composite: An in vitro Study
نویسندگان
چکیده مقاله:
Background & Aims: Repair of defective restoration is more conservative than replacing it. Veneering the amalgam restorations with opaque resin materials can satisfy the esthetic demands. Evaluation of interfacial bond quality between amalgam and composite surface is one of the important factors in assessing the quality of repaired amalgam which can be achieved by micro leakage test and bond strength test. The aim of this study was to assess the effect of introduced amalgam and also the bonding agent on shear bond strength of amalgam and composite interface. Methods: First, 72 acrylic models (20*33 mm) were provided and categorized into two groups of A and B. we used Tytin (kerr,USA) amalgam in group A and Cinalux (Shahid faghihi, Tehran) amalgam in group B. Amalgam surface was scratched by using a diamond bur. All the groups were etched and rinsed. In A1 group, nothing was done after etching and rinsing. In A2 group, single bond and in A3 group Excite was used. B1, B2 and B3 groups were respectively prepared like A1, A2 and A3 groups. DenFil composite was used in all groups. Shear bond strength was assessed by using Universal testing machine. All the specimens were seen under stereo microscope (Olympus, Germany) with 75% magnification. Tukey HSD test was used for statistical analysis. Results: In the groups which were filled with Tytin, A3 group had significantly higher bond strength than A1 group (P=0.001). In groups which were filled with Sinalux, B3 group had significantly higher bond strength than B1 and B2 groups (P=0.001 and 0.03 respectively). Bond strength was significantly higher in A1 compare to B1, A2 compare to B2, and A3 compared to B3 (P=0.001). Conclusion: According to the obtained results, the type of introduced amalgam and also the bonding agent can affect shear bond strength of amalgam and composite interface. Tytin amalgam compared to Cinalux amalgam can create more shear bond strength. Also, excite bonding causes higher bond strength compared to single bond.
منابع مشابه
A comparative evaluation of shear bond strength of immediately repaired composite resin – An in-vitro study
The aim of this study is to “evaluate the shear bond strength of immediately repaired light cured composite resin using different bonding agents”. Forty recently extracted human incisors were mounted on acrylic resin blocks and cavity (5 × 3mm) was prepared at the middle third of the crown. The prepared cavity was etched, rinsed, dried and restored using Single bond adhesive (3M), composite and...
متن کاملShear bond strength of Composite / Amalgam restorations: Effect of using adhesive cement
Shear bond strength of Composite / Amalgam restorations: Effect of using adhesive cement Dr. M. Khoroushi *- Dr. M. Yeganehjo ** *Assistant Professor of Operative Dentistry & Dental Materials Dept., Faculty of Dentistry, Isfahan University of Medical Sciences. ** Dentist. Abstract Background and Aim: The aim of this study was to evaluate the shear bond strength (SBS) of composite/amalgam restor...
متن کاملEffect of Triple Antibiotic Paste on Bond Strength of Composite to Dentin: An In Vitro Study
Background and Aim: Considering the increasing use of antibiotics in root canal therapy and the possible effects of intracanal medicaments on the bond strength of composite restorations, the aim of this study was to evaluate the effect of triple antibiotic paste (TAP) on shear bond strength of three types of composite resins to dentin. Materials and Methods: In this in-vitro, experimental st...
متن کاملEvaluation of different surface treatment on shear bond strength of composite to E max porcelain (in-vitro)
Background and Aim: The aim of this study was to investigate the shear bond strengthof composite to Emax porcelain using different methods of ceramic surface preparation (in vitro). Material and Methods: In this laboratory study, 36 porcelain disks were made and divided into four equal groups. The first group was prepared by sandblasting with 50 micron alumina particles, in the second group rec...
متن کاملEffect of triple Antibiotic paste and 2% chlorhexidine gel on shear bond strength of composite resin to dentin; an in vitro study
متن کامل
Comparative Evaluation of shear Bond Strength of universal Dental Adhesives -An in vitro study
BACKGROUND Patient demand for tooth colored restorations and desire for minimally invasive restorations have made composites an indispensable part of the restorative process. An important factor affecting the intra-oral performance of composite restorations is bonding. MATERIAL AND METHODS Ninty six freshly extracted molar teeth were collected and occlusal 3mm is removed using a diamond disc ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 23 شماره 6
صفحات 783- 789
تاریخ انتشار 2016-11-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023