Estimation of Sound Absorption Behavior of Combined Panels Comprising Kenaf Fibers and Micro-Perforated Plates below 2500 Hertz
نویسندگان
چکیده مقاله:
Introduction: Natural materials are more efficient and attractive than synthetic materials. In this study, the sound absorption behavior by natural kenaf composite and Micro-Perforated Panel (MPP) at low and medium frequency region was investigated. Material and Methods: Initially, the results of kenaf fibers with a thickness of 10 mm were validated by the Finite Element Method (FEM) based on COMSOL Multiphysics 5.3a. The studied combined panel is consisting kenaf fibers with micro-perforated plates and an air layer. This study examined the varying arrangement of the behind layers of the MPP, the different thickness of the layers, and the structural parameters of MPP. The structure with the best absorption coefficient was chosen for the following stage and was considered constant at each stage. Results: The arrangement of composite layers indicated a strong direct effect on the sound absorption performance; as we discovered that kenaf fibers behind MPP led to better performance in frequencies below 2500 Hz. In addition to the chamber depth behind the MPP, the material and macroscopic properties of the layers, at the same depth, are also important determinants of the exact point of the resonant frequency. Furthermore, configurations in which air layer depth is more than the absorption layer, with the same diameter (hole) and depth (chamber), maximum resonant absorption peak is achieved. Conclusion: Low-frequency sounds can be successfully dissipated by combining MP plates with kenaf fibers as reinforcing absorber in combined panel. In general, choosing the optimum structural parameters (Composite panel according to structure A with 0.5 mm hole diameter and 2% perforation percentage) allows a significant absorption at a specific frequency range. In this context, the use of numerical estimation to assess the sound absorption behavior can be meticulously substituted the difficult methods and laboratory costs.
منابع مشابه
Experimental and Theoretical Analysis of Sound Absorption Properties of Finely Perforated Wooden Panels
Perforated wooden panels are typically utilized as a resonant sound absorbing material in indoor noise control. In this paper, the absorption properties of wooden panels perforated with tiny holes of 1-3 mm diameter were studied both experimentally and theoretically. The Maa-MPP (micro perforated panels) model and the Maa-Flex model were applied to predict the absorption regularities of finely ...
متن کاملAcoustic properties of 3D printed bio-degradable micro-perforated panels made of Corkwood Fiber-Reinforced composites
Introduction: Micro perforated panel (MPP) absorbents promise the next generation of sound absorbers as they have significant advantages over other porous adsorbents. In this study, we will investigate the acoustic performance of MPP absorbents made of biodegradable polylactic acid composite reinforced with natural corkwood fibers (PLA/Corkwood) by 3D printing technology. Material and Methods:...
متن کاملExtraordinary sound screening in perforated plates.
We report extraordinary effects in the transmission of sound through periodically perforated plates, supported by both measurements and theory. In agreement with recent observations in slit arrays, M. H. Lu et al. [Phys. Rev. Lett. 99, 174301 (2007)10.1103/PhysRevLett.99.174301], nearly full transmission is observed at certain resonant frequencies, pointing out similarities of the acoustic phen...
متن کاملModal Filters For In-Duct Sound Based on the Cremer Impedance and Micro-Perforated Plates
The design of a new filter-type is presented that allows a sufficient reduction of in-duct aero-acoustic noise. The filter is a hybrid design containing a lined duct section based on the so called Cremer impedance and a section with combinations of micro-perforated plates. The Cremer impedance section strongly damps the zero-order or plane wave mode while the MPP section which breaks the circum...
متن کاملPerformance of multiple micro-perforated panels in a duct
Generalized formulation is developed analytically to calculate the transmission loss performance of a silencer by using multiple micro-perforate panel (MPP) array silencers in ventilation duct system. The device, based on single MPP design, consists of different expansion chambers with the side-branch cavities covered by micro-perforate panels of different properties. The theoretical model can ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 12 شماره 4
صفحات 872- 894
تاریخ انتشار 2022-12
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023