Diagnosis and Ergonomic Design of Oxy Gas Welding Workstation by RULA Method. Case Study: Welding Workshops
نویسندگان
چکیده مقاله:
Introduction: Working under non-ergonomic situations can cause physical damage. It's compulsory for the students of almost every engineering discipline to do parts of their training activitiy in various workshops including welding workstations; needless to say, the paucity of appropriate situations in such workshops may lead to physical injuries. On the other hand, ergonomic design of workstations can be considered a way to keep human health. The purpose of this study is an investigation onthe application of ergonomic solutions in the design of workstations and Working situation improvement in oxy gaseous welding workshops. Method: In this study, workstations of the welding workshops in one of the public universities were selected as the case studies. To carry out a more accurate evaluation of the workshop environment, assessment of the work environment (FIOH MSD) has been used as method. The critical indicators of the current status of workstations were analyzed, using the CATIA V5 R21 software, the RULA method, and the proposed solutions. Result: The results of the RULA clearly indicate a serious need to workstations's reform and Improve their level of safety. The Risk levels for the left and right hands were 6 and 7, which were decrease to 3 and 4 after redesigning the workplace and reforming its situations. Conclusion: Studies and assessment indicate that during welding activities, postures of people cause serious injuries to various parts of the body, especially the spine and neck. Therefore, workplace redesigning that is based on sit-stand workstation standards can be a suitable solution to correct the posture of people in oxy gas welding workshops.Workstation redesigned involve some features such a increasing the dexterity and delicacy during welding and the proper use of Inclusive Design factors to adjust the height of table, chair and the angle of table surface.
منابع مشابه
The Impact of Teaching Oxy-Fuel Welding on Gas Metal Arc Welding Skills
Industrial technology programs around the country must be sensitive to the demands of manufacturing and industry as they continue to replace “vocational” curriculum with high-tech alternatives. This article examines whether or not teaching oxyacetylene welding in the industrial technology classroom is required to learn arc welding processes. The results of this study suggests that there appears...
متن کاملGas tungsten arc welding
Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...
متن کاملWelding Fume and Gas Exposure
A recent $1 million award by an Illinois jury to a welder was the first plaintiff victory in a welding rod failure-to-warn suit and many similar cases are expected to follow. In the case of Elam v. AO Smith et. al., the jury concluded that the manganese in welding fumes caused a 65-year old worker to develop a neurological disorder similar to Parkinson’s disease (i.e., Manganism). Since there a...
متن کاملOccupational exposure to welding gases during three welding processes and risk assessment by SQRCA method
Background: Hazardous chemical agents in the welding operation are a mixture of metal fumes and toxic gases, the inhalation of which causes adverse health effects among welders. The emission of gases in the workplace is a logical cause for concern regarding the potential development of respiratory disease. The aim of the present study was to determine the concentration values of gases discharge...
متن کاملDesign of Spot Welding Robot
Welding robot has played an extremely important role in the welding production of high-quality, high-efficiency. The paper designed the hardware structure and software of spot welding robot. The hardware design mainly includes the major modules of arm and base; the hardware design includes two parts: manual mode and automatic mode. Manual mode is generally used for the robot system installation...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 11 شماره 1
صفحات 72- 81
تاریخ انتشار 2019-11
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی برای این مقاله ارائه نشده است
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023