Decreasing Starting Current for Separate Excited DC Motor using ANFIS Controller

نویسندگان

  • Fardad Farokhi Assistant Professor, Electrical Engineering Department, Islamic Azad University, Central Tehran Branch, Tehran, Iran
  • Saber Ghadri MSc Student, Electrical Engineering Department, Islamic Azad University, Central Tehran Branch, Tehran, Iran
  • Shahram Javadi Assistant Professor, Electrical Engineering Department, Islamic Azad University, Central Tehran Branch, Tehran, Iran
چکیده مقاله:

Today, DC motors is still being used globally due to their easy speed controllability. In this article, an Adaptive Neuro-Fuzzy Inference System (ANFIS) controller is designed for DC motors. The main purpose of performing such task is to reduce the DC motor starting current and deleting the ripple current during starting time in considering control parameters such as: rise time, settling time, maximum overshoot and system steady state error. The results have been simulated in MATLAB and a comparison is made between ANFIS controller and PID controller

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

decreasing starting current for separate excited dc motor using anfis controller

today, dc motors is still being used globally due to their easy speed controllability. in this article, an adaptive neuro-fuzzy inference system (anfis) controller is designed for dc motors. the main purpose of performing such task is to reduce the dc motor starting current and deleting the ripple current during starting time in considering control parameters such as: rise time, settling time, ...

متن کامل

The Design of the Hybrid Pid-anfis Controller for Speed Control of Brushless Dc Motor

This paper presents the design of the hybrid PID-ANFIS controller for controlling the speed of the Brushless Direct Current Motor (BLDCM). The objective of this work is to obtain the BLDCM speed controller equipment effectively. The hybrid PID-ANFIS controller is a combination of classical PID controller and ANFIS controller. This method is applied to BLDCM speed controller by simulation and im...

متن کامل

Design of Current Controller for Two Quadrant DC Motor Drive by Using Model Order Reduction Technique

In this paper, design of current controller for a two quadrant DC motor drive was proposed with the help of model order reduction technique. The calculation of current controller gain with some approximations in the conventional design process is replaced by proposed model order reduction method. The model order reduction technique proposed in this paper gives the better controller gain value f...

متن کامل

Application of DC/DC Buck Power Converter in DC Motor for Speed Controlling Using PI Controller

DC motor widely used-high precision digital controls. Speed control of dc motor is achieved with smooth starter by using buck converter. Hard switching causes unsatisfactory dynamic behaviour produces abrupt variations in the V & I of the motor overcome by dc-dc buck power converter by PI controller. A separately excited dc motor is used for this simulation. The proposed system with PI control ...

متن کامل

Input-Constrained Current Controller for DC/DC Boost Converter

This paper presents a simple input-constrained current controller for a DC/DC boost converter with stability analysis that considers the nonlinearity of the converter model. The proposed controller is designed to satisfy the inherent input constraints of the converter under a physically reasonable assumption, which is the first contribution of this paper. The second contribution is providing a ...

متن کامل

Using an Appropriate Controller for Independent Current Control for Motoring of Force Windings of Bearing less Induction Motor

A bearingless induction machine has combined characteristics of induction motor and magnetic bearings. Therefore, the advantages are small size and low-cost. In the magnetic suspension of the bearingless motors, suspension forces are generated based on the feedback signals of displacement sensors detecting the movement of the rotor shaft. The suspension forces are generated taking an advantage ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 02  شماره 2

صفحات  91- 94

تاریخ انتشار 2013-03-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023