Comparative Research on Optimal Damping Matching of Seat System for an off-Highway Dump Truck
نویسندگان
چکیده مقاله:
To protect the driver of off-highway dump trucks from the harmful vibration, this paper presents the comparison results to determine the optimal damping of the seat system by different optimization design plans. Three optimization schemes are considered including individually optimizing the damping of the cushion, individually optimizing the damping of the seat suspension, and integrately optimizing both of them. To compare the three optimization schemes, the seat system for an off-highway dump truck is taken as the baseline model. Initially, the parameters of the cushion, the seat suspension, and the air spring for the seat system were determined by corresponding test and the nonlinear dynaimic model of the seat system was created. Then, the model was validated by the test data from the field measurement. Subsequently, on the basis of the measured seat base acceleration, the corresponding damping coefficients under the three schemes were optimized. Finally, the road tests were conducted to verify and compare the degree of the comfort improvement. The results show that there is a relative smaller room for the comfort improvement by individually optimizing the cushion or by individually optimizing the seat suspension. The integrated optimization is the best to improve the comfort.N
منابع مشابه
Analytical Matching of Optimal Damping Characteristics Curve for Vehicle Passive Suspensions
To facilitate the damping matching of dampers for vehicle passive suspensions, this paper proposes an analytical matching method of the optimal piecewise linear damping characteristics curve. Based on the vehicle vibration model, taking the suspension dynamic deflection as the constraint, by the vibration acceleration and the wheel dynamic load, an objective function about the relative damping ...
متن کاملEvaluation Research of Traction Motor Performance for Mine Dump Truck Based on Rough Set Theory
This paper presents the traction motor evaluation method depending on the electric transmission energy transfer characteristics and different source of supply, including motor manufactures, diesel turbine manufacturers, wheel side reducer manufacturers and electric drive system integrated manufacturers. 9 evaluations are proposed in 3 levels from the motor body and control performance, electric...
متن کاملObjectifying Discomfort Seat Measurement for next Generation Truck Driver’s Seat
Comfort is an attribute that today’s drivers demand more and more. Seat is one of the important features of vehicle and there is the place where the professional driver spends most of their time. According to ‘European Union Legislation for Drivers and Promote’, the weekly driving time for truck drivers shall not exceed 56 hours. Assuming eight week vacation and one more for holiday, the truck ...
متن کاملFeedback Linearization Control for Path Tracking of Articulated Dump Truck
The articulated dump truck is a widespread transport vehicle for narrow rough terrain environment. To achieve the autonomous driving in the underground tunnel, this article proposes a path following strategy -for articulated vehicle based on feedback linearization algorithm. First of all, the kinematic model of articulated vehicle, which reflects the relationship between the structure parameter...
متن کاملInvestigating the usability of an Integrated Research Automation System (SEAT): Heuristic Evaluation
Background and Objectives: Today, many hardware and software products, including office automation software, and web-based websites are used by employees, including professors and employees of different departments in offices. Websites are considered one of the main aspects of competition in any organization. This study aims to investigate the usability of the Integrated Research Automation Sys...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 31 شماره 2
صفحات 204- 211
تاریخ انتشار 2018-02-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023