Compact LPF using T-shaped resonator with sharp roll-off and ultra wide stopband

نویسندگان

  • Behnam Afzali Department of Electrical Engineering, Faculty of Technical and Vocational No.2, Kermanshah Branch, Technical and Vocational University (TVU), Kermanshah, Iran.
  • Farshad Nadi Department of Electrical Engineering, Faculty of Technical and Vocational No.2, Kermanshah Branch, Technical and Vocational University (TVU), Kermanshah, Iran.
  • Farshid Yousefi Moghadam Department of Electrical Engineering, Faculty of Technical and Vocational No.2, Kermanshah Branch, Technical and Vocational University (TVU), Kermanshah, Iran.
  • Rohullah Zallbeygi Department of Electrical Engineering, Faculty of Technical and Vocational No.2, Kermanshah Branch, Technical and Vocational University (TVU), Kermanshah, Iran.
چکیده مقاله:

  In this paper, a microstrip lowpass filter with an ultra-wide stopband with sharp roll-off and compact size is designed and fabricated. To provide a very small dimension, T-shaped and stepped impedance have been used. The cut of frequency at -3 dB is 3.1 GHz. In the proposed structure, insertion loss is less than 0.12 and return loss is more than 15 dB. To achieve a -20dB attenuation level in the stopband, modified L-shaped structure is utilized. This filter has an ultra-wide stopband that is expanded from 3.37 GHz to 37.5 GHz also the suppression level is greater than -20dB. The size of the fabricated LPF is about 16.6 * 13.5 mm2 which corresponds to an electrical of 0.28ƛg * 0.22ƛg, where ƛg is the guided wavelength at 3.1 GHz, which is very small. The proposed filter is designed, simulated, optimized, fabricated and measured. There is good agreement between the simulated and measured results.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Compact Microstrip Lowpass Filter with Sharp Roll-off and Wide Stopband Using Semicircle Ended Stub Resonator

In this paper, a semicircle ended stub resonator, cascaded to a modified radial patch to design a compact lowpass filter with sharp roll-off and wide stopband is proposed. This filter has 3 dB cutoff frequency at 1.54 GHz. The transition band is only 0.26GHz from 1.54 GHz to 1.8 GHz with corresponding attenuation levels of −3 dB and −20 dB respectively. Maximum insertion loss is 0.1 dB in the p...

متن کامل

Microstrip Low-pass Filter with Sharp Roll off and Wide Stop-band Using Multiple Cascaded Modified Radial Stubs Resonators

This paper presents a novel microstrip low-pass filter with good performance. A complete detailed theoretical analysis for the proposed filter is given using equivalent circuit models. The proposed filter applying multiple cascaded modified radial stubs resonators provides a sharp cut off frequency response that has a 185 dB/GHz roll off rate. Also, U-shaped attenuators provide a wide stop-band...

متن کامل

Compact Microstrip Lowpass Filter With Ultra-Wide Stopband Using Patch Resonators and Open Stubs

A compact microstrip lowpass filter with ultra-wide stopband characteristics and high suppression level is presented. To achieve compact size and wide stopband suppression along with improved impedance matching, symmetrically loaded resonant patches, open stubs and stair shaped high impedance stub are introduced in the filter. The measurement results show good agreement with the simulations. Th...

متن کامل

Analysis of Novel Approach to Design of Ultra - wide Stopband Microstrip Low - Pass Filter Using Modified U - Shaped Resonator

© 2015 Gholamreza Karimi et al. 945 http://dx.doi.org/10.4218/etrij.15.0114.0188 A novel microstrip low-pass filter is presented to achieve an ultra-wide stopband with 11 harmonic suppression and very sharp skirt characteristics. The filter is composed of a modified U-shaped resonator (which creates two fully adjustable transmission zeroes), a T-shaped resonator (which determines a cut-off freq...

متن کامل

Compact and Wide Stopband Lowpass Filter Using Open Complementary Split Ring Resonator and Defected Ground Structure

A compact (0.16 g × 0.08 g) and wide stopband lowpass filter design using open complementary split ring resonator (OCSRR) and defected ground structure (DGS) is presented in this paper. Low pass filter is constructed using two cascaded stages of OCSRR. Since the rejection bandwidth of the OCSRR is narrow, tapered dumbbell shaped DGS section is placed under the OCSRR to enhance the bandwidth. Th...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 1

صفحات  4- 4

تاریخ انتشار 2018-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023