An Innovation in Film Cooling of the Gas Turbine Blades Applying an Upstream Jet
نویسندگان
چکیده مقاله:
A new design concept is introduced to control the near-wall integration between the hot-gas boundary layer and the cooling jets in order to enhance the adiabatic film cooling effectiveness of the gas turbine blades. In this new approach, another film cooling port, having a very low blowing ratio, which prevents formation of the counter-rotating vortex pare, is applied just upstream of the main film cooling jet. The fluid injected from the small upstream port changes the flow pattern, resultsinwider horseshoe vortices in the span-wise direction, and generates a more uniform distribution of the coolant film. Also, this coolant fluid flows towards the low pressure region located just behind the main film-cooling hole. Therefore, by producing a cold layer of gas beneath the coolant jet and diverting the hot cross-flow gases into this area, it significantly improves the film cooling effectiveness, especially in the near field of the main jet. The obtained results show lower stream-wise velocity gradients near the wall, which considerably decreases the wall shear stresses, comparing to the regular film cooling holes.
منابع مشابه
Simulation of Mist Film Cooling on Rotating Gas Turbine Blades
Film cooling technique has been successfully applied to gas turbine blades to prevent it from the hot flue gas. However, a continuous demand of increasing the turbine inlet temperature to raise the efficiency of the turbine requires continuous improvement in film cooling effectiveness. The concept of injecting mist (tiny water droplets) into the cooling fluid has been proven under laboratory co...
متن کاملPerformance Evaluation of Simple Aero Gas Turbine Cycle with Transpiration Cooling of Gas Turbine Blades
Aero gas turbine engines have been using mainly film cooling and convection cooling techniques. For operating at high gas temperature amongst different cooling options the transpiration cooling technique has emerged as the most promising technique to improve the gas turbine cycle performance by allowing higher turbine inlet temperatures. This paper investigates the advantages of transpiration c...
متن کاملan investigation of the types of text reduction in subtitling: a case study of the persian film gilaneh with english subtitles
چکیده ندارد.
15 صفحه اولSimulation of Mist Film Cooling at Gas Turbine Operating Conditions
Air film cooling has been successfully used to cool gas turbine hot sections for the last half century. A promising technology is proposed to enhance air film cooling with water mist injection. Numerical simulations have shown that injecting a small amount of water droplets into the cooling air improves film-cooling performance significantly. However, previous studies were conducted at conditio...
متن کاملCooling Turbine Blades using Exciting Boundary Layer
The present study is concerned with the effect of exciting boundary layer on cooling process in a gas-turbine blades. The cooling process is numerically investigated. Observations show cooling the first row of moving or stable blades leads to increase their life-time. Results show that minimum temperature in cooling line with exciting boundary layer is lower than without exciting. Using block i...
متن کاملAn Investigation of Mist/Air Film Cooling with Application to Gas Turbine Airfoils
................................................................................................................................. v Chapter
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 9 شماره 1
صفحات -
تاریخ انتشار 2633-04-21
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023